Abstract:Finding alternative solutions of water source containing short-term relative high turbidity and large organic content is a pressing need in view of the inherent limitations of traditional inorganic coagulants. Requirement of significant dosage increase for conventional iron and aluminum salt coagulants can create several challenges including dose adjustment, suboptimal performance and high concentration of residual metal ions. In this study, acrylamide monomer (AM) and methacryloyloxyethyltrimethylammonium chloride (DMC) were grafted onto starch and carboxymethyl starch to obtain novel cationic and amphoteric starch-modified coagulants. Concurrently, the obtained coagulants were comprehensively evaluated under varying simulated water quality conditions to analyze their turbidity and organic matter removal efficiencies. Polymerized aluminium chloride (PACl) was used as the reference coagulant to evaluate the roles of polymer charge density, total charge, and molecular chain length in the coagulation mechanism for further illustration of their efficacy. In comparison to the traditional coagulant PACl, the modified coagulant was found to be more effective in enhancing flocculation and aggregation behavior, lowering of energy barriers, and enhancing adsorption energy by using the Density Functional Theory (DFT) calculations and Extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory based investigation of the mechanism. Moreover, these behaviors were mainly attributed to significant exchange of charge density between coagulant and the pollutants. Additionally, in order to facilitate accurate and efficient treatment of water having diverse qualities, quadratic polynomial equation based mathematical model was constructed for quantitative analysis and model prediction. Findings of this study point towards an effective and precise approach to coagulation technology and thereby enabling sustainable and efficient purification of turbid source water containing large organic matter.

SC Response Characteristics of Two Kinds of Coagulant

A Comparative Study Of Conventional Coagulation And Sludge Recycling Enhanced Coagulation For Low-Turbidity Source Water: The Effect And Applicability

Landfill Leachate Pretreatment by Coagulation–flocculation Process Using Iron-Based Coagulants: Optimization by Response Surface Methodology

Control of Residual Aluminum in Drinking Water by Enhanced Coagulation with Chitosan

Distribution of aluminum iron chloride species and its impacts on coagulation effectiveness

Research on treatment of pulp and paper mill secondary effluent by coagulation

Preparation and application of polymeric silicate coagulant: a short review

Relative Importance of Hydrolyzed Al(III) Species (ala, Alb, and Alc) During Coagulation with Polyaluminum Chloride: A Case Study with the Typical Micro-Polluted Source Waters

Automatic control for chemical dosing in laboratory-scale coagulation process by using an optical monitor

Influential factors of formation kinetics of flocs produced by water treatment coagulants.

THE EFFECT ON ACTIVATED SLUDGE ACTIVITY OF COAGULANTS APPLIED IN CHEMICAL PHOSPHORUS REMOVAL

Phosphorus removal by enhanced coagulation in simulative and treated wastewater

Study on Chlorothalonil Removal by Coagulation

Alkalinity Effect of Coagulation with Polyaluminum Chlorides: Role of Electrostatic Patch

Multiple Response Optimization of the Coagulation Process for Upgrading the Quality of Effluent from Municipal Wastewater Treatment Plant

Comparative Study on the Removal Rate of CODcr with Three Kinds of Coagulants

Transformation rule of aluminum form of Al-based coagulants in coagulation and sedimentation process

Coagulation Performance and Floc Characteristics of Poly-Ferric-titanium-silicate-chloride in Coking Wastewater Treatment

Novel Cationic and Amphoteric Starch-Modified Coagulants for Efficient Treatment of Relatively High Turbidity and Large Organic Matter Source Waters: Performance, Predictive Modeling and Mechanism Analysis

Response Surface Methodology for Treatment of Paper Mill Wastewater by Using Inorganic Polymeric Coagulant

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate