Abstract:The polysilicate aluminum ferric (PSAF) was synthesized via copolymerization of polysilicic acid (PSi), AlCl3 and FeCl3 for treating oily wastewater from Daqing gas field. This study investigated the effects of key preparation factors such as the degree of PSi's preactivation and the ratio of (Fe + Al)/Si and Al/Fe on both polymerization and coagulation performance exhibited by PSAF. To determine the optimal timing for introducing Al3+ and Fe3+, zeta potential, viscosity and particle size were investigated. Additionally, infrared spectroscopy, X-ray powder diffraction, polarizing microscopy and scanning electron microscope analysis were employed to investigate the structure and morphology of PSAF. The results indicate that under conditions characterized by a SiO2 mass fraction of 2.5% and pH = 4.5, an optimal timing for introducing Al3+ and Fe3+ is at 100 min when PSi exhibits moderate polymerization along with sufficient stability. When considering molar ratios such as (Al + Fe)/Si being 6:4 and Al/Fe being 5:5, respectively, PSAF falls within a "stable zone" enabling storage period up to 32 days. Moreover, Jar test results demonstrate that at a dosage of 200 mg/L PSAF for oily wastewater treatment in gas fields could reach the maximum turbidity removal efficiency up to 99.5% while oil removal efficiency reach 88.6% without pH adjustment. The copolymerization facilitates the formation of larger PSAF aggregates with positive potential, thereby augmenting the coagulants' adsorption bridging and charge neutralization capabilities. As a result, PSAF has great potential as a practical coagulant for treating oil-containing wastewater in industrial settings.

Preparation and application of polymeric silicate coagulant: a short review

Preparation and Coagulation Performance of Polyaluminum Lanthanum Silicate Coagulant

Facile synthesis of composite polyferric magnesium–silicate–sulfate coagulant with enhanced performance in water and wastewater

Application of Composite Pre-Polymerized Coagulants for the Treatment of High-Strength Industrial Wastewaters

Study on the preparation of polysilicate ferric flocculant and its treatment of high turbidity tailings water

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

Preparation and coagulation-flocculation performance of covalently bound organic hybrid coagulant with excellent stability

An enhanced coagulation using ferric chloride and poly-ferric chloride coagulant assisted by polyamidine: Performance and mechanisms

Application of a green coagulant with PACl in efficient purification of turbid water and its mechanism study

Preparation of poly ferric sulfate and the application in micro-polluted raw water treatment

Polymer based flocculants: Review of water purification applications

An enhanced coagulation using a starch-based coagulant assisted by polysilicic acid in treating simulated and real surface water

Comprehensive Review of Modification, Optimisation, and Characterisation Methods Applied to Plant-Based Natural Coagulants (PBNCs) for Water and Wastewater Treatment

Study on preparation,characterization and application of nano-sized polyferric sulfate coagulant

Progress of the Research on Polysilicate-aluminium Coagulant

Graphene Oxide/Fe-Based Composite Pre-Polymerized Coagulants: Synthesis, Characterization, and Potential Application in Water Treatment

Enhanced Coagulation-Flocculation Performance of Iron-Based Coagulants: Effects of PO4(3-) and SiO3(2-) Modifiers

Progress in Researches of Polysilicate-Containing Composite Inorganic Polymer flocculants

Recent advancement in the application of hybrid coagulants in coagulation-flocculation of wastewater: A review

Application of Polyelectrolytes for Contaminant Removal and Recovery During Water and Wastewater Treatment: A Critical Review

Excellent coagulation performance of polysilicate aluminum ferric for treating oily wastewater from Daqing gasfield: Responses to polymer properties and coagulation mechanism