Abstract:In this study, red mud was used as the main raw material to prepare polyaluminum-ferric chloride (PCFA) with high added value. The effects of the liquid–solid ratio, reaction temperature, reaction time, hydrochloric acid concentration during acid leaching, polymerization time, OH − /Fe molar ratio, and polymerization temperature on the preparation of PCFA were investigated and determined by conducting single-factor optimization experiments under optimal preparation conditions. Characterization results show that the surface of the PCFA flocculant has compact and dense porosity and a dense sheet-like structure, and PCFA contains hydroxyl-bridged iron–aluminum polymers. When the settling time was 30 min, the stirring intensity was 200 rpm; the initial concentration of Nano-titanium dioxide(TiO 2 -NPs) was 30 mg·L −1 ; the pH value was 7.0; the dosage of PCFA was 25 mg·L −1 , and the optimum removal rates of TiO 2 -NPs and turbidity were 84.8% and 81.3%, respectively. The flocs produced by PCFA treatment of TiO 2 -NPs were large and dense. Under optimal flocculation conditions, the average particle size of PCFA-TiO 2 -NP flocs was 2.98 μm, and the fractal dimension was 1.66. Based on the abovementioned flocculation experimental data, a Grey correlation method was established to evaluate the degree of correlation among factors such as ionic strength, settling time, stirring strength, kaolin concentration, initial concentration, reaction pH value, and dosage and the performance of PCFA coagulation to remove TiO 2 -NP-containing wastewater. In the reaction system of the PCFA coagulation of TiO 2 -NPs, the dosage is the most important factor.

Study on preparation,characterization and application of nano-sized polyferric sulfate coagulant

Preparation of poly ferric sulfate and the application in micro-polluted raw water treatment

Novel ferromagnetic nanoparticle composited PACls and their coagulation characteristics.

Study on Preparation and Flocculation Properties of Inorganic Polymer Flocculant Polyferric Silicate Sulfate (Pfss)

Primary study on synthesis of PPFS and its application for depositing lead from wastewater

Preparation and Application of Slag Compound Flocculant

Experimental Study on Preparation of Polymeric Ferric Phosphoric Sulfate by Bio-oxidation Andfractal Characteristics of Flocs at Different Preparation Parameters

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

Further Synthesis and Application of Polyphosphate Ferric Sulfate

Preparation and Applications of Inorganic Polymer Flocculant Poly Aluminum Ferric Sulfate

Study on the preparation of polysilicate ferric flocculant and its treatment of high turbidity tailings water

Hydrolysis and coagulation behavior of polyferric sulfate and ferric sulfate

Landfill Leachate Pretreatment by Coagulation–flocculation Process Using Iron-Based Coagulants: Optimization by Response Surface Methodology

Study on the Performance of a Novel Inorganic Polymeric Flocculant

Research on the preparation of composite polysilicic acid flocculants and their performances

Synthesis, Characterization, and Coagulation of Polymeric Ferric Sulfate

Research on Treatment of Nickel-containing Waste Water with Polymeric Ferric Phosphoric Sulfate

Properties of polyferric-silicate-sulfate(PFSS) coagulant

Preparation and coagulation-flocculation performance of covalently bound organic hybrid coagulant with excellent stability

Flocculation Performance of PCFA Composite Coagulant for Removing Nanoparticles

Study on the pretreatment of printing & dyeing wastewater with composite polyaluminum ferric flocculants