Abstract:Current demand for waste recycling, phosphogypsum-based excess-sulphate slag cement (PESSC) as a sustainable cement prepared by solid wastes, urges enhancing its performance development based on microstructure optimisation. For the purpose of improving the performance and durability of PESSC used in normal or corrosive environments, it is deemed an efficient technique to produce iron-doped compounds with high thermodynamic stability. This paper presents a systematic study of the effect of iron modification on PESSC binders by introducing 0%-2% polyferric sulphate (PFS) from a multiscale viewpoint. XPS, 29Si and 27Al NMR, and TEM were used to characterise the nanostructure of solid particles firstly at Level I. Then, the chemical composition and phase assemblage of PESSC binders were revealed at Level II in terms of ICC, ICP, DTG-DSC, FTIR, BSE-EDS and XRD. Finally, setting time and strength development were determined at Level III. Results indicated that the soluble FeOH4- supplied by the hydrolysis of PFS promotes the generation of iron-doped ettringite with a greater length-to-diameter ratio and thermodynamic stability. Seeding effect of iron doping also promotes the production of spherical and retiform gels with a slight influence on the chemical components and polymerisation. Despite the fact that iron doping weakens the early strength of PESSC mortars, it promotes the persistent hydration rate by retarding precipitation and encapsulation of hydrates on the surface of the slag, showing excellent strength in the later stages. In view of microstructure evolution and performance development during each stage, PFS supplementation within 1.0% is considered a feasible modification of PESSC relying on the formation control of iron-doped hydrates.

Synthesis, Characterization, and Coagulation of Polymeric Ferric Sulfate

Further Synthesis and Application of Polyphosphate Ferric Sulfate

Primary study on synthesis of PPFS and its application for depositing lead from wastewater

Experimental Study on Preparation of Polymeric Ferric Phosphoric Sulfate by Bio-oxidation Andfractal Characteristics of Flocs at Different Preparation Parameters

Hydrolysis and coagulation behavior of polyferric sulfate and ferric sulfate

Preparation of poly ferric sulfate and the application in micro-polluted raw water treatment

Properties of polyferric-silicate-sulfate(PFSS) coagulant

Study on Preparation and Flocculation Properties of Inorganic Polymer Flocculant Polyferric Silicate Sulfate (Pfss)

Study on Manufacture and Technology Optimization of Solid Polymerized Ferric Sulfate

Enhanced Coagulation-Flocculation Performance of Iron-Based Coagulants: Effects of PO4(3-) and SiO3(2-) Modifiers

Preparation and Applications of Inorganic Polymer Flocculant Poly Aluminum Ferric Sulfate

Preparation and performance characterization of solid polyferric sulfate(SPFS) water purifier from sintering dust

Study on preparation,characterization and application of nano-sized polyferric sulfate coagulant

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

Role of polyferric sulphate in hydration regulation of phosphogypsum-based excess-sulphate slag cement: A multiscale investigation

Study on the preparation of polysilicate ferric flocculant and its treatment of high turbidity tailings water

Effect of poly sodium-p-styrenesulfonate on the phase formation and morphology of the hydrothermally synthesized bismuth ferrite powders

Batch Preparation of High Basicity Polyferric Sulfate by Hydroxide Substitution from Bipolar Membrane Electrodialysis

Research on Treatment of Nickel-containing Waste Water with Polymeric Ferric Phosphoric Sulfate

Application of Fractal Dimension on the Flocculation of Polymeric Ferric Phosphoric Sulfate

Immobilized Microbial Catalytic Oxidation Preparation and Application of Biopolymeric Ferric Sulfate