Abstract:Recent advance on the application of the composite coagulant in the coagulation–flocculation process has attracted a widespread interest. Previous research has demonstrated that iron-based composite coagulant could enhance the performance of the coagulation–flocculation. In this research, results of an experimental study using polymeric aluminum ferric sulfate (PAFS) as a modified coagulation reagent for treating wastewater was presented. The structure and morphology of PAFS were investigated using some conventional methods, and response surface method (RSM) was employed to optimized the coagulation–flocculation process while the evaluation of treatment efficiency was determined by measuring both the reduction of turbidity and chemical oxygen demand (COD). In addition, parameters affecting coagulation–flocculation behavior such as coagulant dosage, wastewater initial pH, were also examined. The results showed the structure of PAFS as a non-stoichiometric basic iron sulfate salt taking the shape of a compact network and exhibited better coagulation–flocculation performance when the species distribution of (Fe–Al)a, (Fe–Al)b and (Fe–Al)c in PAFS were 37.4%, 3.79% and 59.08%, respectively. Compared with PFS, PAFS showed a superior flocculation performance with the maximum COD removal efficiency of 83.6% and the lowest residual turbidity of 0.96NTU at the coagulant dosage of 45mg/L. In the coagulation–flocculation process, the adsorption-bridging and charge neutralization mechanisms played an important role in colloidal destabilization and aggregation.

Preparation and Applications of Inorganic Polymer Flocculant Poly Aluminum Ferric Sulfate

Preparation and applications of inorganic polymer composite flocculant poly aluminum ferric sulfate

Preparation and Application of Slag Compound Flocculant

Study on Structural Characterization and Algae-Removing Efficiency of Polymeric Aluminum Ferric Sulfate (PAFS)

Characterization and coagulation–flocculation behavior of polymeric aluminum ferric sulfate (PAFS)

Optimization of Preparation and Application of Polymeric Aluminum Ferric Sulfate Coagulant by Response Surface Analysis

Polymerization mechanism of polyferric aluminum phosphatic sulfate (PFAPS) and its flocculation effect on simulated dye wastewater

Experimental Study on Preparation of Polymeric Ferric Phosphoric Sulfate by Bio-oxidation Andfractal Characteristics of Flocs at Different Preparation Parameters

Preparation of Polymeric Aluminum Ferric Silicate for the Pre-Treatment of Oily Wastewater Through Response Surface Method

Preparation and Performance Analysis of Inorganic Polymer Flocculant PZFSiC

Preparation of a Composite Coagulant: Polymeric Aluminum Ferric Sulfate (PAFS) for Wastewater Treatment

Preparation method of polymeric aluminum ferric sulfate flocculating agent (liquid)

Application of Fractal Dimension on the Flocculation of Polymeric Ferric Phosphoric Sulfate

PREPARATION AND APPLICATION OF POLYMER FERRIC ALUMINUM SULFATE CHLORIDE FLOCCULANT

The Production and Application of Complex Flocculant Polysilicate Aluminium Ferric(PSAF)

Quantitative Investigation on Flocculation and Destruction of Poly-silicic-ferric (PSF) Coagulant

Study on Preparation and Flocculation Properties of Inorganic Polymer Flocculant Polyferric Silicate Sulfate (Pfss)

Study on the preparation of polysilicate ferric flocculant and its treatment of high turbidity tailings water

Research Progress of Polysilicate Aluminium Ferric Flocculant (PSAF)

Preparation of Poly-ferric Silicate Sulfate(PFSS)from Tetraethylorthosilicate and Its Algae Removal Performance

Preparation and coagulation-flocculation performance of covalently bound organic hybrid coagulant with excellent stability