Abstract:In this study, red mud was used as the main raw material to prepare polyaluminum-ferric chloride (PCFA) with high added value. The effects of the liquid–solid ratio, reaction temperature, reaction time, hydrochloric acid concentration during acid leaching, polymerization time, OH − /Fe molar ratio, and polymerization temperature on the preparation of PCFA were investigated and determined by conducting single-factor optimization experiments under optimal preparation conditions. Characterization results show that the surface of the PCFA flocculant has compact and dense porosity and a dense sheet-like structure, and PCFA contains hydroxyl-bridged iron–aluminum polymers. When the settling time was 30 min, the stirring intensity was 200 rpm; the initial concentration of Nano-titanium dioxide(TiO 2 -NPs) was 30 mg·L −1 ; the pH value was 7.0; the dosage of PCFA was 25 mg·L −1 , and the optimum removal rates of TiO 2 -NPs and turbidity were 84.8% and 81.3%, respectively. The flocs produced by PCFA treatment of TiO 2 -NPs were large and dense. Under optimal flocculation conditions, the average particle size of PCFA-TiO 2 -NP flocs was 2.98 μm, and the fractal dimension was 1.66. Based on the abovementioned flocculation experimental data, a Grey correlation method was established to evaluate the degree of correlation among factors such as ionic strength, settling time, stirring strength, kaolin concentration, initial concentration, reaction pH value, and dosage and the performance of PCFA coagulation to remove TiO 2 -NP-containing wastewater. In the reaction system of the PCFA coagulation of TiO 2 -NPs, the dosage is the most important factor.

Polymerization mechanism of polyferric aluminum phosphatic sulfate (PFAPS) and its flocculation effect on simulated dye wastewater

Preparation and Application of Slag Compound Flocculant

Preparation and Applications of Inorganic Polymer Flocculant Poly Aluminum Ferric Sulfate

Novel ferromagnetic nanoparticle composited PACls and their coagulation characteristics.

Application of Fractal Dimension on the Flocculation of Polymeric Ferric Phosphoric Sulfate

Experimental Study on Preparation of Polymeric Ferric Phosphoric Sulfate by Bio-oxidation Andfractal Characteristics of Flocs at Different Preparation Parameters

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

Aluminum formate (AF): Synthesis, characterization and application in dye wastewater treatment

Phosphorus removal from sewage by flocculated foamed lightweight aggregate: Performance optimisation, adsorption kinetics and mechanisms

The Production and Application of Complex Flocculant Polysilicate Aluminium Ferric(PSAF)

Enhanced Coagulation-Flocculation Performance of Iron-Based Coagulants: Effects of PO4(3-) and SiO3(2-) Modifiers

Flocculation Performance of PCFA Composite Coagulant for Removing Nanoparticles

Study on the preparation of polysilicate ferric flocculant and its treatment of high turbidity tailings water

Primary study on synthesis of PPFS and its application for depositing lead from wastewater

Study on the pretreatment of printing & dyeing wastewater with composite polyaluminum ferric flocculants

Enhanced performance of a novel flocculant containing rich fluorine groups in refractory dyeing wastewater treatment: Removal mechanisms

Research on PSAFS for Printing and Dyeing Wastewater Treatment

Synthesis, purification and characterization of polyaluminum ferric chloride (PAFC) with high (Al+Fe) b content

Study on the flocculation condition of Poly-Silicate-Aluminum-Ferric (PSiAF) coagulant prepared with coal gangue as raw material

Advanced removal of phosphorus from urban sewage using chemical precipitation by Fe-Al composite coagulants

Physicochemical characterization and flocculation performance evaluation of PAC / PMAPTAC composite flocculant