Abstract:The polysilicate aluminum ferric (PSAF) was synthesized via copolymerization of polysilicic acid (PSi), AlCl3 and FeCl3 for treating oily wastewater from Daqing gas field. This study investigated the effects of key preparation factors such as the degree of PSi's preactivation and the ratio of (Fe + Al)/Si and Al/Fe on both polymerization and coagulation performance exhibited by PSAF. To determine the optimal timing for introducing Al3+ and Fe3+, zeta potential, viscosity and particle size were investigated. Additionally, infrared spectroscopy, X-ray powder diffraction, polarizing microscopy and scanning electron microscope analysis were employed to investigate the structure and morphology of PSAF. The results indicate that under conditions characterized by a SiO2 mass fraction of 2.5% and pH = 4.5, an optimal timing for introducing Al3+ and Fe3+ is at 100 min when PSi exhibits moderate polymerization along with sufficient stability. When considering molar ratios such as (Al + Fe)/Si being 6:4 and Al/Fe being 5:5, respectively, PSAF falls within a "stable zone" enabling storage period up to 32 days. Moreover, Jar test results demonstrate that at a dosage of 200 mg/L PSAF for oily wastewater treatment in gas fields could reach the maximum turbidity removal efficiency up to 99.5% while oil removal efficiency reach 88.6% without pH adjustment. The copolymerization facilitates the formation of larger PSAF aggregates with positive potential, thereby augmenting the coagulants' adsorption bridging and charge neutralization capabilities. As a result, PSAF has great potential as a practical coagulant for treating oil-containing wastewater in industrial settings.

The Production and Application of Complex Flocculant Polysilicate Aluminium Ferric(PSAF)

Preparation and Application of Slag Compound Flocculant

Study on the preparation of polysilicate ferric flocculant and its treatment of high turbidity tailings water

Preparation and Applications of Inorganic Polymer Flocculant Poly Aluminum Ferric Sulfate

Study on the flocculation condition of Poly-Silicate-Aluminum-Ferric (PSiAF) coagulant prepared with coal gangue as raw material

Synthesis of PSAFS Using Bayer Red Mud and Its Flocculation Effect Evaluation

Study on Preparation and Flocculation Properties of Inorganic Polymer Flocculant Polyferric Silicate Sulfate (Pfss)

Polymerization mechanism of polyferric aluminum phosphatic sulfate (PFAPS) and its flocculation effect on simulated dye wastewater

Direct preparation of polysilicic acid flocculant by using pickling waste liquor of metal plate

Research on the preparation of composite polysilicic acid flocculants and their performances

Study on the Performance of a Novel Inorganic Polymeric Flocculant

Excellent coagulation performance of polysilicate aluminum ferric for treating oily wastewater from Daqing gasfield: Responses to polymer properties and coagulation mechanism

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

Experimental Study on Preparation of Polymeric Ferric Phosphoric Sulfate by Bio-oxidation Andfractal Characteristics of Flocs at Different Preparation Parameters

Application Research of Depurate Sorts of Water Samples with the Polysilicate Aluminum Ferric Floccule

Application of Fractal Dimension on the Flocculation of Polymeric Ferric Phosphoric Sulfate

Enhanced Coagulation-Flocculation Performance of Iron-Based Coagulants: Effects of PO4(3-) and SiO3(2-) Modifiers

Research on PSAFS for Printing and Dyeing Wastewater Treatment

Properties of polyferric-silicate-sulfate(PFSS) coagulant

Synthesis and Application of PAFSi

Further Synthesis and Application of Polyphosphate Ferric Sulfate