Abstract:The polysilicate aluminum ferric (PSAF) was synthesized via copolymerization of polysilicic acid (PSi), AlCl3 and FeCl3 for treating oily wastewater from Daqing gas field. This study investigated the effects of key preparation factors such as the degree of PSi's preactivation and the ratio of (Fe + Al)/Si and Al/Fe on both polymerization and coagulation performance exhibited by PSAF. To determine the optimal timing for introducing Al3+ and Fe3+, zeta potential, viscosity and particle size were investigated. Additionally, infrared spectroscopy, X-ray powder diffraction, polarizing microscopy and scanning electron microscope analysis were employed to investigate the structure and morphology of PSAF. The results indicate that under conditions characterized by a SiO2 mass fraction of 2.5% and pH = 4.5, an optimal timing for introducing Al3+ and Fe3+ is at 100 min when PSi exhibits moderate polymerization along with sufficient stability. When considering molar ratios such as (Al + Fe)/Si being 6:4 and Al/Fe being 5:5, respectively, PSAF falls within a "stable zone" enabling storage period up to 32 days. Moreover, Jar test results demonstrate that at a dosage of 200 mg/L PSAF for oily wastewater treatment in gas fields could reach the maximum turbidity removal efficiency up to 99.5% while oil removal efficiency reach 88.6% without pH adjustment. The copolymerization facilitates the formation of larger PSAF aggregates with positive potential, thereby augmenting the coagulants' adsorption bridging and charge neutralization capabilities. As a result, PSAF has great potential as a practical coagulant for treating oil-containing wastewater in industrial settings.

Study on the flocculation condition of Poly-Silicate-Aluminum-Ferric (PSiAF) coagulant prepared with coal gangue as raw material

Study on the preparation of polysilicate ferric flocculant and its treatment of high turbidity tailings water

Quantitative Investigation on Flocculation and Destruction of Poly-silicic-ferric (PSF) Coagulant

The Production and Application of Complex Flocculant Polysilicate Aluminium Ferric(PSAF)

Research Progress of Polysilicate Aluminium Ferric Flocculant (PSAF)

Preparation of Polymeric Aluminum Ferric Silicate for the Pre-Treatment of Oily Wastewater Through Response Surface Method

Characterization and coagulation–flocculation behavior of polymeric aluminum ferric sulfate (PAFS)

Excellent coagulation performance of polysilicate aluminum ferric for treating oily wastewater from Daqing gasfield: Responses to polymer properties and coagulation mechanism

Preparation of ferric-polysilicate (PSiF) coagulant and its application in oil-field wastewater treatment

Study on Preparation and Flocculation Properties of Inorganic Polymer Flocculant Polyferric Silicate Sulfate (Pfss)

Research on PSAFS for Printing and Dyeing Wastewater Treatment

Preparation and Performance Analysis of Inorganic Polymer Flocculant PZFSiC

Synthesis of PSAFS Using Bayer Red Mud and Its Flocculation Effect Evaluation

Characterization and Phosphorus Removal of Poly-Silicic-ferric Coagulant

Research on Flocculation Behaviors of Poly Ferric Silicate Sulphate and Its Application in Heavy Oil Wastewater Treatment

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

Evaluation Conditions to Treat Slime Water with Coagulant-Bioflocculant by Orthogonal Design

Experimental Study on the Preparation of PAFS by Extracting Aluminum and Iron Elements From Coal Gangue

Study on Preparation of Polysilicate Chloride Aluminum and Ferric Flocculant with Fly Ash

Application Research of Depurate Sorts of Water Samples with the Polysilicate Aluminum Ferric Floccule

Study on pre-treatment of avermectin wastewater with PSAF coagulant