Abstract:In this study, an inorganic flocculant polysilicate ferric (PSF) was prepared with steel pickling waste liquid and industrial sodium silicate. The morphology and structure of PSF were analyzed by FTIR, XRD, and metalloscope. Results indicated that PSF is a polysilicic acid composite flocculant, and presented a network of cross-linked branches structure. The effect of Fe/Si molar ratios, flocculant dosage, different coagulants, and the initial pH on the coagulation behaviors of PSF were investigated by flocculation experiment. In addition, the formation of particle flocs in the water treatment process was observed with aid of PVM instrument. The results showed that the flocculation effect of PSF with the Fe/Si molar ratio of 1.5 was better than that of other coagulants, and the formed flocs under the same conditions were larger and compact. With a settling time of 10 min, the supernatant transmittance of kaolin suspension can reach 94.4% at a dosage of 0.8 g/L. Compared with natural sedimentation, the sedimentation rate of tail mud increased by 63.0%. From the results of flocculant characterization, zeta potential and PVM images, it can be inferred that Fe ions formed hydroxyl iron ions with positively charged by oxidative hydrolysis complexation. The charge neutralization by positively charged iron polymer has a significant effect, especially under acidic conditions. Furthermore, adsorption bridging of high molecular iron silicon polymers with branchlike structures is considered to play a vital role in high turbidity tailings water treatment.

Application Research of Depurate Sorts of Water Samples with the Polysilicate Aluminum Ferric Floccule

Preparation and Application of Slag Compound Flocculant

Research on PSAFS for Printing and Dyeing Wastewater Treatment

Study on the preparation of polysilicate ferric flocculant and its treatment of high turbidity tailings water

Study on the flocculation condition of Poly-Silicate-Aluminum-Ferric (PSiAF) coagulant prepared with coal gangue as raw material

Direct preparation of polysilicic acid flocculant by using pickling waste liquor of metal plate

Study on the Performance of a Novel Inorganic Polymeric Flocculant

Primary study on synthesis of PPFS and its application for depositing lead from wastewater

The Production and Application of Complex Flocculant Polysilicate Aluminium Ferric(PSAF)

Research on the preparation of composite polysilicic acid flocculants and their performances

Preparation and Applications of Inorganic Polymer Flocculant Poly Aluminum Ferric Sulfate

Polymerization mechanism of polyferric aluminum phosphatic sulfate (PFAPS) and its flocculation effect on simulated dye wastewater

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

Study on the pretreatment of printing & dyeing wastewater with composite polyaluminum ferric flocculants

Experimental Study on Preparation of Polymeric Ferric Phosphoric Sulfate by Bio-oxidation Andfractal Characteristics of Flocs at Different Preparation Parameters

Electroplating Wastewater Treatment by Polyaluminum Ferric Chloride

Synthesis of PSAFS Using Bayer Red Mud and Its Flocculation Effect Evaluation

Study on Preparation and Flocculation Properties of Inorganic Polymer Flocculant Polyferric Silicate Sulfate (Pfss)

Study on New Composite Flocculants in Dewantering of Dredged Sediments and Solidification of Heavy Metals

Landfill Leachate Pretreatment by Coagulation–flocculation Process Using Iron-Based Coagulants: Optimization by Response Surface Methodology

Optimization of Hydraulic Condition on Flocculation for Micro-polluted Water