Abstract:In this study, red mud was used as the main raw material to prepare polyaluminum-ferric chloride (PCFA) with high added value. The effects of the liquid–solid ratio, reaction temperature, reaction time, hydrochloric acid concentration during acid leaching, polymerization time, OH − /Fe molar ratio, and polymerization temperature on the preparation of PCFA were investigated and determined by conducting single-factor optimization experiments under optimal preparation conditions. Characterization results show that the surface of the PCFA flocculant has compact and dense porosity and a dense sheet-like structure, and PCFA contains hydroxyl-bridged iron–aluminum polymers. When the settling time was 30 min, the stirring intensity was 200 rpm; the initial concentration of Nano-titanium dioxide(TiO 2 -NPs) was 30 mg·L −1 ; the pH value was 7.0; the dosage of PCFA was 25 mg·L −1 , and the optimum removal rates of TiO 2 -NPs and turbidity were 84.8% and 81.3%, respectively. The flocs produced by PCFA treatment of TiO 2 -NPs were large and dense. Under optimal flocculation conditions, the average particle size of PCFA-TiO 2 -NP flocs was 2.98 μm, and the fractal dimension was 1.66. Based on the abovementioned flocculation experimental data, a Grey correlation method was established to evaluate the degree of correlation among factors such as ionic strength, settling time, stirring strength, kaolin concentration, initial concentration, reaction pH value, and dosage and the performance of PCFA coagulation to remove TiO 2 -NP-containing wastewater. In the reaction system of the PCFA coagulation of TiO 2 -NPs, the dosage is the most important factor.

Preparation and Application of Slag Compound Flocculant

Coagulation performance and mechanism of polyaluminum ferric chloride (PAFC) coagulant synthesized using blast furnace dust

Preparation and Applications of Inorganic Polymer Flocculant Poly Aluminum Ferric Sulfate

Electroplating Wastewater Treatment by Polyaluminum Ferric Chloride

Preparation, characterization and application of a composite bioflocculant

Influence of composite flocculant FeCl3-APAM on vacuum drainage of river-dredged sludge

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

Application of Flocculation Combined with Vacuum Preloading to Reduce River-Dredged Sludge

Study on the pretreatment of printing & dyeing wastewater with composite polyaluminum ferric flocculants

Research and Application of Gangue for the Preparation of Polymerized Aluminum Magnesium Chloride Flocculant

Landfill Leachate Pretreatment by Coagulation–flocculation Process Using Iron-Based Coagulants: Optimization by Response Surface Methodology

Polymerization mechanism of polyferric aluminum phosphatic sulfate (PFAPS) and its flocculation effect on simulated dye wastewater

Flocculation Performance of PCFA Composite Coagulant for Removing Nanoparticles

Study on the preparation of polysilicate ferric flocculant and its treatment of high turbidity tailings water

Research on the preparation of composite polysilicic acid flocculants and their performances

High‐efficiency Preparation of Fe–Al Based Flocculants from Red Mud by Microwave Selective Carbothermic Reduction and Magnetic Separation

Primary study on synthesis of PPFS and its application for depositing lead from wastewater

To treat wastewater with wastes: a highly efficient flocculant from fly ash and rice straw

High-efficiency leaching of Al and Fe from fly ash for preparation of polymeric aluminum ferric chloride sulfate coagulant for wastewater treatment

Synthesis, purification and characterization of polyaluminum ferric chloride (PAFC) with high (Al+Fe) b content

Preparation and Application of Microbial Flocculant