Abstract:Using single metal salts of zirconium, lanthanum, and iron as raw materials and sodium alginate as a cross-linking agent, a new composite adsorbent was prepared via the co-precipitation method and embedding immobilization technology, and its phosphorus adsorption performance in wastewater was evaluated. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used for characterization, and a 0.5 mol·L−1 sodium hydroxide solution was used to regenerate the adsorbent. The experimental results demonstrated that the adsorption rate reached 99.88% when the wastewater volume was 50 mL, the initial concentration of phosphorus-containing wastewater was 5 mg·L−1, the pH was 5, the dosage of composite adsorbent was 0.2 g, and the adsorption time was 200 min. The prepared adsorbent could reduce the initial phosphorus concentration of 5 mg·L−1 to 0.006 mg·L−1 in simulated wastewater, and from 4.17 mg·L−1 in urban sewage to undetected (<0.01 mg·L−1), thus meeting the discharge requirements of the grade A standard of the Urban Sewage Treatment Plant Pollutant Discharge Standard (GB18918-2002). The adsorption process conformed to the Freundlich adsorption isothermal equation and quasi-second-order kinetic equation, and the adsorption reaction was exothermic and spontaneous. More importantly, after three lye regeneration tests, the removal rate of phosphorus in water remained above 68%, that is, the composite adsorbent could be reproducibly fabricated and recycled. The characterization results showed that the surface of the composite adsorbent was rough, with a complex pore structure. After phosphorus removal, the surface morphology of the composite adsorbent showed a similar honeycomb structure, with a P-H, P-O stretching vibration peak and a characteristic P2p peak. At the same time, the proportion of hydroxyl groups (M-OH) on the metal surface decreased after adsorption. Our findings thus demonstrate that the mechanism of phosphorus removal is mainly based on the coordination exchange reaction between phosphate and metal active sites and surface hydroxyl groups, resulting in the formation of granular phosphate deposits.

Advanced removal of phosphorus from urban sewage using chemical precipitation by Fe-Al composite coagulants

Characterization and coagulation–flocculation behavior of polymeric aluminum ferric sulfate (PAFS)

STUDY ON PHOSPHORUS REMOVAL OF EFFLUENT FROM MUNICIPAL WASTEWATER TREATMENT PLANT BY POLYALUMINUM FERRIC SULFATE SILICATE

Preparation of a Composite Coagulant: Polymeric Aluminum Ferric Sulfate (PAFS) for Wastewater Treatment

A comprehensive investigation to the fate of phosphorus in full-scale wastewater treatment plants using aluminum salts for enhanced phosphorus removal

Preparation of Acid-Base Composite Modified A1-Fe Flocculants:Phosphorus Removal Performance

Study on Supplemental Chemical Phosphorus Removal from Municipal Wastewater with Low Carbon and High Nitrogen and Phosphorus

Coagulation Removal of Phosphorus from a Southern China Reservoir in Different Stages of Algal Blooms: Performance Evaluation and AlP Matching Principle Analysis.

Phosphorus Removal Using Ferric–calcium Complex As Precipitant: Parameters Optimization and Phosphorus-Recycling Potential

Phosphorus removal by enhanced coagulation in simulative and treated wastewater

Speciation matching mechanisms between orthophosphate and aluminum species during advanced P removal process.

Removal of phosphorus from phosphonate-loaded industrial wastewaters via precipitation/flocculation

Optimized Coagulation on A Municipal Wastewater Treatment: Competitive and Synergetic Effect among Different Pollutants

Development of a Polyaluminum Ferric Titanium Chloride for Phosphorous Removal in Water

Study on Phosphorus Removal by PAFS-PDMDAAC Composite Flocculant

Study on chemical enhanced coagulation for phosphorus removal from domestic sewage

Municipal Wastewater Phosphorus Removal by Coagulation.

Preparation and Phosphorus Removal Performance of Zr–La–Fe Ternary Composite Adsorbent Embedded with Sodium Alginate

A Parallel Study of Phosphorus Removal by Chemical Precipitation with FeCl3 and AlCl3 in Biological Aerated Filters

Experimental Study of Phosphorus Removal Technique by Coagulation in Drinking Water Treatment

Efficiency and Mechanism of Trace Phosphorus Removal in Water by Iron-aluminum Composited Adsorbent