Comparison of Phosphorus Removal Processes by Ferrous Salts and Ferric Salts

Zheng Ping

2013-01-01

Abstract:Ferric salts and ferrous salts are common precipitators used for chemical phosphorus removal technology.In order to provide theoretical basis and suitable technical parameters for the selecting and optimizing the technic of phosphorus removal by iron salts,theoretical analysis and practical experiments were conducted.Herein the phosphorus removal processes were compared in respect of thermodynamics,stoichiometry,process characteristics and operation cost.The results of theoretical analysis show that,compared to ferrous salt,the reaction between ferric salt and phosphate is more favorable,the dose of precipitant required is less and the residual phosphorus concentration is lower.However,phosphorus removal with ferric salt leads to a low pH,which implies that more alkali for aftertreatment is needed to meet the discharge standard.The results of practical experiments show that,the effects of iron/phosphorus ratio and pH are significant on phosphorus removal for both ferric salt and ferrous salt,but the combined effects of factors(Fe/P,pH,FMS – Flash Mixing Speed) are obviously different from one another.During the wastewater treatment,the synergic action of the above operation parameters should be fully used,while the antagonistic action of operation parameters should be carefully avoided.Compared with ferrous salt,the phosphorus removal with ferric salt is more efficient with less precipitant requirement and lower residual phosphorus concentration,but higher cost.Based on the theoretical analysis and practical experiment,the mixture of ferric salt and ferrous salt is recommended as an alternative precipitant,or ferrous salt is suggested to be partially or completely oxidized into ferric salt for phosphorus removal,which could combine the advantages of both the two technologies.