Abstract:Conventional aluminium sulfate (AS) coagulant's inability to effectively meet stringent water quality requirements have created the need to explore enhanced composite coagulants. The coagulation efficiency of AS and composite AS and polydimethyldiallylammonium chloride (AS/PDMDAAC) coagulants were investigated using jar test and then, coupled with rapid sand filtration (RSF). The various composite AS/PDMDAAC at different intrinsic viscosity of PDMDAAC and mass ratio of PDMDAAC to AS in coagulant solutions were optimized and operated at same supernatant turbidity (SST) or same dosage mode (SD). The results showed about 7-10% reduction in dosage for all composite AS/PDMDAAC and also improved water qualities compared to AS only. The patterns of water quality improvements at lower (0.65 dL/g), medium (1.60 dL/g), and higher (2.60 dL/g) intrinsic viscosity of cationic polymer PDMDAAC among different mass ratio of PDMDAAC to AS in the composite mixtures were 5:1 > 20:1 > 10:1; 10:1 >= 5:1 > 20:1; 20:1 > 10:1 > 5:1 respectively. The percentage removal efficiencies for AS and optimal composite coagulant at intrinsic viscosity (1.60 dL/g) and mass ratio (10:1) operated at SST or SD after filtration for CODMn, NH3N and turbidity were (71.20, 72.72, 73.33%); (69.15, 69.23, 73.08%) and (93.89, 95.07, 97.26%) respectively. It was concluded that enhanced composite AS/ PDMDAAC coagulants operated at SST mode showed significant water quality improvement than conventional AS having 7% and 31.8% for COD and NH3N removal while operational mode at SD produced more significant water quality improvements than conventional AS with 9.49%, 45.45%, and 39.55% for COD, NH3N, and turbidity removal before filtration respectively. More importantly, all composite AS/PDMDAAC met stringent water quality requirements before and after filtration. This research provided new insight about application of economical and effective alternative composite AS/PDMDAAC coagulant useful in the treatment of water for large population.

Facile synthesis of composite polyferric magnesium–silicate–sulfate coagulant with enhanced performance in water and wastewater

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

Enhanced Coagulation-Flocculation Performance of Iron-Based Coagulants: Effects of PO4(3-) and SiO3(2-) Modifiers

Study on the preparation of polysilicate ferric flocculant and its treatment of high turbidity tailings water

Landfill Leachate Pretreatment by Coagulation–flocculation Process Using Iron-Based Coagulants: Optimization by Response Surface Methodology

Research on the preparation of composite polysilicic acid flocculants and their performances

Preparation of poly ferric sulfate and the application in micro-polluted raw water treatment

MgO coated magnetic Fe3O4@SiO2 nanoparticles with fast and efficient phosphorus removal performance and excellent pH stability

Coagulation Efficiency of Polysilicate-Ferric and Its Application to Metal-Processing Wastewater

Novel Covalently Bound Organic Silicon-Ferrum Hybrid Coagulant with Excellent Coagulation Performance and Bacteriostatic Ability

Mechanistic Investigation of an Inorganic-Organic Hybrid Coagulant with Fe3O4 Magnetic Loading-Enhanced Flocculation for Water Treatment

Mechanistic investigation of an inorganic-organic hybrid coagulant with Fe 3 O 4 magnetic loading-enhanced flocculation for water treatment

Properties of polyferric-silicate-sulfate(PFSS) coagulant

An enhanced coagulation using ferric chloride and poly-ferric chloride coagulant assisted by polyamidine: Performance and mechanisms

Preparation and application of polymeric silicate coagulant: a short review

Study on Preparation and Flocculation Properties of Inorganic Polymer Flocculant Polyferric Silicate Sulfate (Pfss)

Comparisons of Coagulation Efficiency of Conventional Aluminium Sulfate and Enhanced Composite Aluminium Sulfate/polydimethyldiallylammonium Chloride Coagulants Coupled with Rapid Sand Filtration

Study on Coagulation Property of Metal-Polysilicate Coagulants in Low Turbidity Water Treatment

Advanced removal of phosphorus from urban sewage using chemical precipitation by Fe-Al composite coagulants

Combined conditioning of inorganic coagulant and polyamine to improve the dewaterability of municipal sludge, minimize dosage and reduce the influence of filtrate

Preparation and Applications of Inorganic Polymer Flocculant Poly Aluminum Ferric Sulfate