Abstract:The utilization of agriculture waste-based adsorbents in the treatment of real industrial wastewater represents an unexplored frontier with significant potential. In this study, the cobalt ferrite-supported activated carbon derived from orange peels (CF40-AC) was used as a magnetic adsorbent for the treatment of real pulp and paper mill effluent (PPME). Detailed insights into the properties and functionalities of the CoFe2O4-AC adsorbent were obtained through an accurate characterization analysis that included X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDX), BET and pore size histogram techniques. Both pure activated carbon (AC) and CF40-AC displayed excellent textural properties with surface area (SBET) equal 2014 and 1345 m2.g−1, respectively. TEM and SEM images display that the magnetic ferrites were well dispersed on the surface of AC. Following the characterization process, the CoFe2O4-AC adsorbent was evaluated for its ability to remove several key pollutants from PPME, including chemical oxygen demand (COD), total dissolved solids (TDS) and turbidity. Moreover, various operational parameters, such as pH, adsorbent dosage, contact time, and stirring rate, were investigated to achieve optimal contaminants removal rates. Remarkably, the CoFe2O4-AC adsorbent demonstrated highly efficient removal rates, with 86.9%, 59,9% and 93.1% for COD, TDS and turbidity, respectively, under optimal conditions (pH 7, adsorbent dose 0.4 gm, contact time 60 min, and stirring rate 150 rpm). The CoFe2O4-AC composite material exhibits promising potential for multiple applications reached 5 cycles without a significant loss in its adsorption or functional properties over successive uses. These results favor the promising potential of CoFe2O4-AC as a sustainable and efficient solution for addressing wastewater treatment challenges in the pulp and paper industry, contributing to both environmental protection and resource conservation.

Response Surface Methodology for Treatment of Paper Mill Wastewater by Using Inorganic Polymeric Coagulant

Optimization of the Coagulation-Flocculation Process for Pulp Mill Wastewater Treatment Using a Combination of Uniform Design and Response Surface Methodology

Application of Response Surface Methodology For Modeling and Optimization of A Bio Coagulation Process (Sewage Wastewater Treatment Plant)

Research on Treatment of Nickel-containing Waste Water with Polymeric Ferric Phosphoric Sulfate

Advancements in the chemical treatment of potable water and industrial wastewater using the coagulation–flocculation process

Advancing cobalt ferrite-supported activated carbon from orange peels for real pulp and paper mill wastewater treatment

Improvement of alum and PACl coagulation by polyacrylamides (PAMs) for the treatment of pulp and paper mill wastewater

Preparation and Applications of Inorganic Polymer Flocculant Poly Aluminum Ferric Sulfate

Evaluation of the self-assembled functional PPFS-P-AM composite for treating oilfield sewage

To treat wastewater with wastes: a highly efficient flocculant from fly ash and rice straw

Treatment of pulp and paper mill wastewater by polyacrylamide (PAM) in polymer induced flocculation

Synthesis of Polyaluminum Chloride Coagulant from Waste Aluminum Foil and Utilization in Petroleum Wastewater Treatment

Modeling and optimizing of coagulation-flocculation process by response surface methodology for rehabilitation of tannery wastewater treatment plant

Coagulation-flocculafion Treatment of Wastewater from Reconstituted Tobacco Sheet Manufacturing by Papermaking Process

Application of Composite Pre-Polymerized Coagulants for the Treatment of High-Strength Industrial Wastewaters

Improving the Removal of Anionic Surfactant in Cardboard Industry Wastewater by Coagulation/Flocculation: Process Optimization with Response Surface Methodology

Novel Polyaluminum Ferric Chloride Composite Coagulant from Bayer Red Mud for Wastewater Treatment

Treatment of Papermaking Mill Wastewater

Optimization of and Mechanism for the Coagulation–flocculation of Oil-Field Wastewater from Polymer Flooding

Characterization and Performance of Poly-Silicic-Cation Coagulant in Treatment of Recycled Paper Wastewater

Research on treatment of pulp and paper mill secondary effluent by coagulation