Abstract:Silver microparticles have inspired much research interest due to their enhanced properties for use in optical, electric, catalytic, and magnetic applications. One such use is as electrically conductive filler for printed electronics. A manufacturing approach has been developed to prepare low-curing-temperature silver pastes. Firstly, silver flakes were synthesized directly by a one-step aqueous-phase reduction reaction, using silver nitrate as silver salt precursor and iron(II) sulfate heptahydrate as reducing agent. Various silver flake samples were synthesized by controlling experimental parameters such as the reaction temperature, surfactant concentration, and reducing agent concentration. The obtained silver powders were characterized by x-ray diffraction analysis, scanning electron microscopy, and dynamic light scattering measurements. The results revealed that the morphology of the silver powders was a plate-like structure with diameter of 1 μm to 1.5 μm and thickness of 30 nm. The prepared silver flakes were then used directly without ball milling to prepare low-curing-temperature silver pastes. The bulk resistivity of a line screen-printed using silver paste containing 48 wt.% (34 ± 5 vol.%) silver flakes and cured at 140°C for 30 min in air was about (1.773 ± 0.118) × 10−6 Ω m. More importantly, the prepared screen-printed patterns exhibited excellent durability in terms of peel strength and folding endurance.

Preparation of epoxy-silver composite conductive silver paste

Preparation of Low Volatile Organic Compounds Silver Paste Containing Ternary Conductive Fillers and Optimization of Their Performances

Preparation and characterization of low temperature curing conductive silver paste for screen printing

Preparation of nano silver pastes applied in printed electronics

Synthesis of Silver Flakes and Their Application as Conductive Filler for Low-Curing-Temperature Silver Pastes

Preparation of a High Conductive Ink with Silver Nanopaticles and Silver Nanorods

Preparation and Properties of Conductive Epoxy Resin Composites

Preparation and Properties of Epoxy/Polyetheramine Flexible Conductive Ink

Preparation Of High-Performance Conductive Ink With Silver Nanoparticles And Nanoplates For Fabricating Conductive Films

Effect of Introducing Conductive Organic Carrier on Properties of Low-Temperature Conductive Silver Paste

Tuning the electrical resistivity of conductive silver paste prepared by blending multi-morphologies and micro-nanometers silver powder

Silver frameworks based on self-sintering silver micro-flakes and its application in low temperature curing conductive pastes

Effect of Prepolymer and Reactive Diluent on the Properties of UV Curable Polyurethane-Based Conductive Silver Paste

Exploration of organic matrixes in conductive silver paste: a comprehensive review

Preparation of Nano Silver Paste and Applications in Transparent Electrodes via Electric-Field Driven Micro-Scale 3D Printing

Investigation of 1-hexanol base silver paste formula for low-temperature sintering

Fabrication of silver electrically conductive adhesive to apply in through-hole filling for PCB interconnection

Hybrid silver pastes with synergistic effect of multi-scale silver fillers and the application in flexible circuits

Low temperature-cured electrically conductive pastes for interconnection on electronic devices