Preparation, Structure, and Properties of Surface Modified Graphene/Epoxy Resin Composites for Potential Application in Conductive Ink
Youliang Cheng,Qingling Zhang,Changqing Fang,Jing Chen,Jian Su,Kaiyan Xu,Liangliang Ai,Donghong Liu
DOI: https://doi.org/10.3390/coatings8110387
IF: 3.236
2018-10-30
Coatings
Abstract:The dispersity of graphene (GE) in the matrix has an important influence on the thermal, mechanical, and electrical properties of its derived composites. In this paper, surface modification with a silane coupling agent and a double injection method were used to improve the dispersity of GE in epoxy resin (EP). The thermal, mechanical, and electrical properties of modified graphene/epoxy resin composites (modified GE/EP) were investigated by the thermogravimetric analysis, a four-probe method, and the tensile and bending strength. The results reveal that these properties of the composites can be improved significantly by using the modified GE as the filler. The surface of the modified GE/EP composite was smooth when the curing temperature was 75 °C. The weight loss of the modified GE/EP composite was lower than that of pure EP. The tensile and bending strength of modified GE/EP-0.07 (0.07 wt % modified GE) reached 74.65 and 106.21 MPa, respectively. In addition, the resistivity of modified GE/EP-0.1 (0.1 wt % modified GE) decreased to 52 Ω·cm, which was lower than that of CB/EP-1 (1 wt % carbon black, 95 Ω·cm) and Ag/EP-50 (50 wt % Ag particles, 102 Ω·cm). It is worth noting that the percolation threshold of the modified GE/EP composites was 0.025 vol % modified GE. These results show that the modified GE/EP composites have a potential application in conductive ink when the modified GE is used as the conductive filler.
materials science, multidisciplinary,physics, applied, coatings & films