Abstract:Abstract Due to the high conductivity and stability of silver, silver ink has been widely used in the field of printed electronics. However, since mechanical strain would cause the contact between key particles to be broken. Recently, higher requirements have been put on the bending resistance of silver paste. In this experiment, by preparing Ag NPs: Ag Flakes composite materials of 20:80 and 30:70 respectively, a new method for preparing stable modified flake silver powder is proposed, and the attachment and growth methods of Ag NPs reduced on micron flake silver powder is discussed. Flake silver powder, dispersant and reducing agent are added to the silver-ammonia complex, and the nano-silver particles are reduced on the flake silver powder by controlling the reaction conditions. When Ag + : Ag Flakes in the solution is 30:70, there is a clear interface between the silver particles and the silver flakes, and the size distribution range is between 10 and 100 nm; when Ag + : Ag Flakes is 20:80, the distance between the nano-silver particles and the silver plate crystal plane is about 0.222 nm and 0.260 nm, these spacings represent the (1–12) and (004) planes of Ag, respectively. The reduced silver particles grow on the surface of the silver sheet, the size is about 5 ∼ 60 nm, and form a sheet-point combination of shaped silver powder, which can be used to make conductive silver paste with cost and performance competitiveness. The reaction can be completed at room temperature (5 ∼ 25 °C) and atmospheric pressure (80 ∼ 100 kPa), the operation is simple, the reaction time is short, and it has a positive effect on the commercial production of printable highly conductive silver paste.

Preparation of nano silver pastes applied in printed electronics

Preparation of Nano Silver Paste and Applications in Transparent Electrodes via Electric-Field Driven Micro-Scale 3D Printing

Green Approach to Prepare Silver Nanoink with Potentially High Conductivity for Printed Electronics

Synthesis of Silver Flakes and Their Application as Conductive Filler for Low-Curing-Temperature Silver Pastes

Development of Silver Nanoparticle Ink for Printed Electronics

Preparation of Antioxidative Nano Copper Pastes for Printed Electronics Application

Preparation of Nano-Silver Conductive Ink and Electrode Properties

Silver frameworks based on self-sintering silver micro-flakes and its application in low temperature curing conductive pastes

Preparation of Low Volatile Organic Compounds Silver Paste Containing Ternary Conductive Fillers and Optimization of Their Performances

Silver Nanoparticles Based Ink with Moderate Sintering in Flexible and Printed Electronics

Preparation of silver nanoparticles and application in water-based conductive inks

The research of manufacture of flexible conductive tracks at room temperature

A Fluorinated Polyimide Based Nano Silver Paste with High Thermal Resistance and Outstanding Thixotropic Performance

Preparation of Micro-Size Spherical Silver Particles and Their Application in Conductive Silver Paste

Optical Printing of Conductive Silver on Ultrasmooth Nanocellulose Paper for Flexible Electronics

Preparation of silver nanopowders and its application in low temperature electrically conductive adhesive

Study on the mechanism of forming silver nanoparticles on micron-scale flake silver powder

Silver Nanoparticles for Conductive Inks: From Synthesis and Ink Formulation to Their Use in Printing Technologies

Preparation of stable aqueous conductive ink with silver nanoflakes and its application on paper-based flexible electronics

Recent Progress in Rapid Sintering of Nanosilver for Electronics Applications

Preparation of Micron-Sized Plate-Like Silver Powders Used in Silver Paste by Wet-Chemical Reduction Method