Abstract:Printed electronics (PE) technology shows huge promise for the realisation of low-cost and flexible electronics, with the ability to pattern heat- or pressure-sensitive materials. In future developments of the PE market, the ability to produce highly conductive, high-resolution patterns using low-cost and roll-to-roll processes, such as inkjet printing, is a critical technology component for the fabrication of printed electronics and displays. Here, we demonstrate inkjet printing of polyacrylic acid (PAA) capped silver nanoparticle dispersions onto paper for high-conductivity electronic interconnects. We characterise the resulting print quality, feature geometry and electrical performance of inkjet patterned features and demonstrate the high-resolution printing, sub-100 micron feature size, of silver nanoparticle materials onto flexible paper substrate. Printed onto photo-paper, these materials then undergo chemically triggered sintering on exposure to chloride contained in the paper. We investigated the effect of substrate temperature on the properties of printed silver material from room temperature to 50 °C. At room temperature, the resistivity of single layer printed features, of average thickness of 500 nm and width 85 μm, was found to be 2.17 × 10−7 Ω·m or 13 times resistivity of bulk silver (RBS). The resistivity initially decreased with an increase in material thickness, when achieved by overprinting successive layers or by decreasing print pitch, and a resistivity of around 10 times RBS was observed after overprinting two times at pitch 75 μm and with single pass print pitch of between 60 and 80 μm, resulting in line thickness up to 920 nm. On further increases in thickness the resistivity increased and reached 27 times RBS at print pitch of 15 μm. On moderate heating of the substrate to 50 °C, more compact silver nanoparticle films were formed, reducing thickness to 200 nm from a single pass print, and lower material resistivity approaching five times RBS was achieved.

Optical Printing of Conductive Silver on Ultrasmooth Nanocellulose Paper for Flexible Electronics

Direct Writing on Paper Substrate to Prepare Silver Electrode Structures for Flexible Sensors.

Silver Nanoparticles Based Ink with Moderate Sintering in Flexible and Printed Electronics

Inkjet-Printed Silver Nanowire Ink for Flexible Transparent Conductive Film Applications

A Simple Strategy towards Highly Conductive Silver‐Nanowire Inks for Screen‐Printed Flexible Transparent Conductive Films and Wearable Energy‐Storage Devices

Preparation of stable aqueous conductive ink with silver nanoflakes and its application on paper-based flexible electronics

Syntheses of Silver Nanowires Ink and Printable Flexible Transparent Conductive Film: A Review

Nano-Silver Ink of High Conductivity and Low Sintering Temperature for Paper Electronics

Inkjet Printing of Flexible Transparent Conductive Films with Silver Nanowires Ink

Gravure Printing of Water-based Silver Nanowire ink on Plastic Substrate for Flexible Electronics

Inkjet Printing of Polyacrylic Acid-Coated Silver Nanoparticle Ink onto Paper with Sub-100 Micron Pixel Size

Facile synthesis of low temperature sintering Ag nanopaticles for printed flexible electronics

Aerosol Jet Printed Silver Nanowire Transparent Electrode For Flexible Electronic Application

Fabrication of paper-based conductive patterns for flexible electronics by direct-writing

Fabrication of an Organic Field Effect Transistor Using Nano Imprinting of Ag Inks and Semiconducting Polymers

An easily processable silver nanowires-dual-cellulose conductive paper for versatile flexible pressure sensors

Foldable Electrochromics Enabled by Nanopaper Transfer Method

Capillary Force-Induced Printing of Stretchable and Mechanically Stable Silver Nanowire Electrodes With Highly Ordered Alignment For Ultra-Flexible Organic Light-Emitting Devices

Highly transparent and conductive electrodes enabled by scalable printing-and-sintering of silver nanowires

Flexible Transparent Electrodes Based on Silver Nanowires: Material Synthesis, Fabrication, Performance, and Applications

Direct Writing Highly Conductive Silver Pattern on Flexible Substrate Based on Particle-Free and Ionic Liquid-Assisted Ink