Abstract:This paper reports a novel oscillation control algorithm for MEMS vibratory gyroscopes using a modified electromechanical amplitude modulation (MEAM) technique, which enhances the robustness against the frequency variation of the driving mode, compared to the conventional EAM (CEAM) scheme. In this approach, the carrier voltage exerted on the proof mass is frequency-modulated by the drive resonant frequency. Accordingly, the pick-up signal from the interface circuit involves a constant-frequency component that contains the amplitude and phase information of the vibration displacement. In other words, this informational detection signal is independent of the mechanical resonant frequency, which varies due to different batches, imprecise micro-fabrication and changing environmental temperature. In this paper, the automatic gain control loop together with the phase-locked loop are simultaneously analyzed using the averaging method and Routh–Hurwitz criterion, deriving the stability condition and the parameter optimization rules of the transient response. Then, a simulation model based on the real system is set up to evaluate the control algorithm. Further, the proposed MEAM method is tested using a field-programmable-gate-array based digital platform on a capacitive vibratory gyroscope. By optimizing the control parameters, the transient response of the drive amplitude reveals a settling time of 45.2 ms without overshoot, according well with the theoretical prediction and simulation results. The first measurement results show that the amplitude variance of the drive displacement is 12 ppm in an hour while the phase standard deviation is as low as 0.0004°. The mode-split gyroscope operating under atmospheric pressure demonstrates an outstanding performance. By virtue of the proposed MEAM method, the bias instability and angle random walk are measured to be 0.9° h−1 (improved by 2.4 times compared to the CEAM method) and 0.068° (√h)−1 (improved by 1.4 times), respectively.

Fast self-resonant startup procedure for digital MEMS gyroscope system.

Digital Fast Startup Procedure for Micro-Machined Vibratory Gyroscopes Using Optimized Fuzzy Control Strategy

MEMS gyroscopes parametric excitation control scheme with constant resonant frequency

A 0.09°/h Bias-Instability MEMS Gyroscope Working with a Fixed Resonance Frequency

Rapid start-up control of high Q-factor MEMS gyroscope

A Sub-0.1°/H Bias-Instability MEMS Gyroscope Using Resonant Constant-Frequency Driving Technique

Identification and Suppression of Driving Force Misalignment Angle for a MEMS Gyroscope Using Parametric Excitation

Design and Test of MEMS Gyroscope Control System Based on LMSD

Performance Improvement for MEMS Gyroscopes by Suppressing the Circuit Phase Delay

A Digital Control Structure for Lissajous Frequency-Modulated Mode MEMS Gyroscope

Drive Mode Control for MEMS Gyroscopes with Electrostatically Tunable Structure

Synchronous Digital Quadrature Demodulation Technique For Resonant Optic Gyroscopes

Resonator Fiber Optic Gyroscope with an All Digitalized System

A novel oscillation control for MEMS vibratory gyroscopes using a modified electromechanical amplitude modulation technique

Resonant Fiber Optic Gyro Based on A Sinusoidal Wave Modulation and Square Wave Demodulation Technique

A New Self-Oscillation Loop for MEMS Vibratory Gyroscopes

Ball-disk rotor gyroscope adaptive quick-start technique

Optimization of Sensitivity for a Novelly-Designed MEMS Resonant Gyroscope

Design and Simulation of Novel MEMS Resonant Gyroscope

Digital closed-loop controller design of a micromachined gyroscope based on auto frequency swept

Design of Digital Demodulation Circuit for Closed Loop Control of Resonant MEMS Gyroscopes