Abstract:This article proposes a digital control structure for a doubly decoupled gyroscope working in the Lissajous frequency-modulated (LFM) mode based on digital phase-locked loops (PLLs), which demodulates the angular rate signal directly from the readable digital gyroscope resonance frequency, eliminating the need for specific frequency readout circuits. The resonance frequencies of the LFM gyroscope working modes contain a mode mismatch frequency modulated by input angular rate, respectively, which are tracked by two digital PLLs followed by subsequent digital demodulation and filtering. A linearized model of the digital PLL is built to analyze noise and control characteristics for different PI parameters. The impact of different amplitude–phase extraction architectures on the extracted phase signal is also addressed in this article. Contrast experiments are carried out using the same gyroscope with large internal thermal stress due to the silicon-glass bonding process and no stress relief structure around the sensing element, working in the traditional amplitude-modulated (AM) mode and the LFM mode. Overall, the LFM working mode maintains its low-temperature sensitivity and high stability in spite of the large internal thermal stress in the gyroscope compared to AM working modes. The maximum scale factor variation over the temperature range from 10 °C to 50 °C is 1000 ppm for the LFM mode compared to 51 900 ppm for the AM closed mode. The maximum zero rate output drift over the same temperature range is 0.1248 °/s for the LFM mode and 10.7139 °/s for the AM closed mode. The scale factor nonlinearity is 329 ppm with an angular rate input range of ±50 °/s for the LFM mode compared to 1902 ppm for the AM closed mode. The LFM mode zero-bias fluctuation for ten days is less than 0.12 °/s. The angle random walk (ARW) and the bias instability (BI) of the LFM gyroscope are 0.316 °/ $\surd \text{h}$ and 2 °/h, respectively.

Digital closed-loop controller design of a micromachined gyroscope based on auto frequency swept

A Digital Control Structure for Lissajous Frequency-Modulated Mode MEMS Gyroscope

Constant-frequency Oscillation Control for Vibratory Micro-Machined Gyroscopes

Design and Test of MEMS Gyroscope Control System Based on LMSD

Analysis on Digital Automatic Gain Control of MEMS Gyro Driven-Loop Circuit

Digital Closed-Loop Control Based on Adaptive Filter for Drive Mode of a MEMS Gyroscope

Digital controller design for sense mode of micro-machined gyroscope

Noise Analysis and Modeling for a Digital Control Architecture for Lissajous Frequency-Modulated MEMS Gyroscope with Amplitude-Modulated Readout

An Improved Phase Lock Loop for Micromechanical Gyroscope with A Carrier Modulation

Identification and Suppression of Driving Force Misalignment Angle for a MEMS Gyroscope Using Parametric Excitation

The Analysis and Design of Closed-Loop Control System for MEMS Vibratory Gyroscopes

Drive Mode Control for MEMS Gyroscopes with Electrostatically Tunable Structure

Digital closed-loop driver design of micromechanical gyroscopes based on coordinated rotation digital computer algorithm

A MICROMECHANICAL MODE-MATCHED GYROSCOPE USING STIFFNESS NONLINEARITY AND ELECTROSTATIC TUNING

MEMS gyroscopes parametric excitation control scheme with constant resonant frequency

Digital Signal Processing For A Micromachined Vibratory Gyroscope Based On A Three Dimensional Adaptive Filter Demodulator

Design of Digital Demodulation Circuit for Closed Loop Control of Resonant MEMS Gyroscopes

Closed loop control design for the sense mode of micromachined vibratory gyroscopes

Design of a digital closed control loop for the sense mode of a mode-matching MEMS vibratory gyroscope

Transient response and stability of the AGC-PI closed-loop controlled MEMS vibratory gyroscopes

Analysis and design of a 3rd order velocity-controlled closed-loop for MEMS vibratory gyroscopes