Abstract:Purpose : Establish a technique for simultaneous interrupted volumetric imaging of internal structure and time-resolved full-field surface strain measurements during in-situ X-ray micro-computed tomography (XCT) experiments. This enables in-situ testing of stiff materials with large forces relative to the compliance of the in-situ load frame, which might exhibit localization (e.g., necking, compaction banding) and other inhomogeneous behaviors. Methods : The system utilizes a combination of in-situ XCT, 2D X-ray imaging, and particle tracking to conduct volumetric imaging of the internal structure of a specimen with interrupted loading and surface strain mapping during loading. Critically, prior to the laboratory-scale XCT experiments, specimens are speckled with a high-X-ray-contrast powder that is bonded the surface. During in-situ loading, the XCT system is programmed to capture sequential 2D X-ray images orthogonal to the speckled specimen surface. A single particle tracking (SPT) or digital image correlation (DIC) algorithm is used to measure full-field surface strain evolution throughout the time-sequence of images. At specified crosshead displacements, the motion and 2D image sequence is paused for volumetric XCT image collection. Results : We show example results on a micro-tensile demonstration specimen additive manufactured from Inconel 718 nickel-chrome alloy. Results include XCT volume reconstructions, crosshead-based engineering stress, and full-field strain maps. Conclusion : We demonstrate an in-situ technique to obtain surface strain evolution during laboratory-scale XCT testing and interrupted volumetric imaging. This allows closer investigation of, for example, the effect of micro-pores on the strain localization behavior of additive manufactured metal alloys. In addition to describing the method using a representative test piece, the dataset and code are published as open-source resources for the community.

Strain Measurements Using Real Time X‐ray Images

X-Ray Computer Tomography on Residual Stress Measurement

A Technique for In-Situ Displacement and Strain Measurement with Laboratory-Scale X-Ray Computed Tomography

Through-Thickness Strain Scanning Using Synchrotron Radiation

Diffraction-Based Multiscale Residual Strain Measurements

Automated indexing for texture and strain measurement with broad-bandpass x-ray microbeams

Measurement of stress using synchrotron x-rays.

Residual Stress of Individual Aluminum Grains from Three Dimensional X-Ray Diffraction

High resolution strain measurements in highly disordered materials

Damage Assessment of Al Alloys Using in Situ Tensile Tests in X-Ray Tomography

The Principle of Strain Reconstruction Tomography: Determination of Quench Strain Distribution from Diffraction Measurements

&Lt;title>grating Diffraction for Strain Measurement in a Microscope</title>

Direct Synchrotron X-Ray Measurements of Local Strain Fields in Elastically and Plastically Bent Metallic Glasses

Strain Microscope with Grating Diffraction Method

&Lt;title>simultaneous Strain and Displacement Measurements in Micromechanics</title>

X-Ray Residual Stress Measurement in Films with Crystallographic Texture and Grain Shape

DIGITAL IMAGE MEASUREMENTS OF STRAIN FIELDS OF CLAY SPECI-MENS WITH HOLES UNDER INTERNAL AND LATERAL PRESSURES IN PLANE STRAIN CONDITION

Strain measurement by contour analysis

Strain Measurement of Particle-Reinforced Composites at the Microscale: an Approach Towards Concurrent Characterization of Strain and Microstructure.

A NEW TECHNIQUE FOR X-RAY STRESS MEASUREMENT BASED ON USING IMAGE PLATE

A New Optical Method for Macro and Micro-zone Strain Measurements