Abstract:Purpose : Establish a technique for simultaneous interrupted volumetric imaging of internal structure and time-resolved full-field surface strain measurements during in-situ X-ray micro-computed tomography (XCT) experiments. This enables in-situ testing of stiff materials with large forces relative to the compliance of the in-situ load frame, which might exhibit localization (e.g., necking, compaction banding) and other inhomogeneous behaviors. Methods : The system utilizes a combination of in-situ XCT, 2D X-ray imaging, and particle tracking to conduct volumetric imaging of the internal structure of a specimen with interrupted loading and surface strain mapping during loading. Critically, prior to the laboratory-scale XCT experiments, specimens are speckled with a high-X-ray-contrast powder that is bonded the surface. During in-situ loading, the XCT system is programmed to capture sequential 2D X-ray images orthogonal to the speckled specimen surface. A single particle tracking (SPT) or digital image correlation (DIC) algorithm is used to measure full-field surface strain evolution throughout the time-sequence of images. At specified crosshead displacements, the motion and 2D image sequence is paused for volumetric XCT image collection. Results : We show example results on a micro-tensile demonstration specimen additive manufactured from Inconel 718 nickel-chrome alloy. Results include XCT volume reconstructions, crosshead-based engineering stress, and full-field strain maps. Conclusion : We demonstrate an in-situ technique to obtain surface strain evolution during laboratory-scale XCT testing and interrupted volumetric imaging. This allows closer investigation of, for example, the effect of micro-pores on the strain localization behavior of additive manufactured metal alloys. In addition to describing the method using a representative test piece, the dataset and code are published as open-source resources for the community.

Inhomogeneous plastic flow investigated by X-ray absorption microtomography of an aluminium alloy containing marker particles

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Investigation of Plastic Yielding in Near-Micrometer Grain Size Aluminum Using Synchrotron Microdiffraction

A Technique for In-Situ Displacement and Strain Measurement with Laboratory-Scale X-Ray Computed Tomography

Flow stress analysis of TWIP steel via the XRD measurement of dislocation density

Observation of bulk plasticity in a polycrystalline titanium alloy by diffraction contrast tomography and topotomography

Strain Distribution and Lattice Rotations During In-Situ Tension of Aluminum with a Transmodal Grain Structure

Analysis of melting and flow in the hot-end of a material extrusion 3D printer using X-ray computed tomography

Micro- and macroscopic plastic flow responses in high Nb-containing TiAl alloy by nanoindentation

Quantitative Anisotropic Damage Mechanism in a Forged Aluminum Alloy Studied by Synchrotron Tomography and Finite Element Simulations

Microstructure and Stress Mapping in 3D at Industrially Relevant Degrees of Plastic Deformation

Heterogeneous local plastic deformation of interstitial free steel revealed using in-situ tensile testing and high angular resolution electron backscatter diffraction

Three-dimensional visualization and quantification of microporosity in aluminum castings by X-ray micro-computed tomography

Quantification of melt pool dynamics and microstructure during simulated additive manufacturing

Coupled microscopic and micromagnetic depth-specific analysis of plastic deformation and phase transformation of metastable austenitic steel AISI 304L by flow forming

Analysis of the meso‐mechanical deformation behavior of Al foams and Ni/Al hybrid foams using time‐lapse μCT measurements and 3D Optical Flow

In-situ synchrotron X-ray micro-diffraction investigation of ultra-low-strain deformation microstructure in laminated Ti-Al composites

Registration of Data from a Multimodal Investigation of Particle Stimulated Nucleation in Aluminum

Investigation of microstructure in additive manufactured Inconel 625 by spatially resolved neutron transmission spectroscopy

In situ Imaging of Precipitate Formation in Additively Manufactured Al-Alloys by Scanning X-ray Fluorescence

Correlative synchrotron absorption edge tomography and microtomography provide insights into the effect of element distribution within intermetallic phases on the fracture behaviour of cast Al-Si alloys