The Principle of Strain Reconstruction Tomography: Determination of Quench Strain Distribution from Diffraction Measurements

Alexander M. Korsunsky,Willem J.J. Vorster,Shu Yan Zhang,Daniele Dini,David Latham,Mina Golshan,Jian Liu

DOI: https://doi.org/10.48550/arXiv.cond-mat/0509011

2005-09-02

Abstract:Evaluation of residual elastic strain within the bulk of engineering components or natural objects is a challenging task, since in general it requires mapping a six-component tensor quantity in three dimensions. A further challenge concerns the interpretation of finite resolution data in a way that is commensurate and non-contradictory with respect to continuum deformation models. A practical solution for this problem, if it is ever to be found, must include efficient measurement interpretation and data reduction techniques. In the present note we describe the principle of strain tomography by high energy X-ray diffraction, i.e. of reconstruction of the higher dimensional distribution of strain within an object from reduced dimension measurements; and illustrate the application of this principle to a simple case of reconstruction of an axisymmetric residual strain state induced in a cylindrical sample by quenching. The underlying principle of the analysis method presented in this paper can be readily generalised to more complex situations.

Materials Science

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: how to reconstruct the quenched elastic strain distribution inside engineering components or natural objects through high - energy X - ray diffraction measurement. Specifically, the authors aim to develop a method that can reconstruct the higher - dimensional strain distribution inside an object from reduced - dimension measurements, thus providing an effective means to evaluate the residual elastic strain inside engineering components.

### Problem Background

Evaluating the residual elastic strain inside engineering components or natural objects is a challenging task because it usually requires mapping a six - component tensor in three - dimensional space. In addition, interpreting data with limited resolution is also a challenge, and it is necessary to ensure that these data are consistent and not contradictory with the continuous deformation model. To achieve this goal, efficient measurement interpretation and data reduction techniques need to be included.

### Research Motivation

The research motivation of this paper lies in overcoming the limitations of existing high - energy X - ray diffraction techniques. High - energy X - ray diffraction techniques are mainly used for forward scattering, that is, the scattering direction is close to the incident beam direction, which makes it difficult to measure the strain close to the incident beam direction, and the measurement volume (gauge volume) appears as an elongated rhombus, reducing the resolution along the incident and scattering beam directions.

### Solution

The authors propose a method based on strain - reconstruction tomography, combining the information of multiple measurement results to overcome the above limitations. This method is similar to reconstruction tomography, which reconstructs 2D projections into 3D structures. The difference is that a parametric model of the object (such as an unknown strain distribution) is used here, and optimization is carried out by minimizing the difference between the measured values and the simulated values.

### Experimental Verification

To verify the effectiveness of this method, the authors selected a simple example: reconstructing the axisymmetric residual elastic strain distribution generated in a nickel - based superalloy IN718 cylinder after quenching treatment. The experimental results show that this method can fit the measured data well and successfully reconstruct the strain distribution.

### Application Prospects

The application prospects of this method are extensive, especially in reducing deformation and residual stress during the manufacturing process and improving the durability of components. By accurately evaluating the residual strain distribution, the heat treatment process can be optimized, thereby improving the material properties.

### Summary of Mathematical Formulas

1. **Length of Measurement Volume**:
\[
L=\frac{(h_I + h_D)\cos\theta}{\sin^{2}\theta}=\frac{h_I + h_D}{2\sin\theta}
\]
When \(h_I = h_D = h\), it is simplified to:
\[
\frac{L}{h}=\frac{1}{\sin\theta}
\]

2. **Strain Calculation Formula**:
\[
\epsilon=\frac{a}{a_0}-1
\]
where \(a_0\) is the lattice parameter in the unstrained state.

3. **Strain Distribution Model**:
\[
e(r)=c_0 - c_2r^{2},\quad r\leq a
\]

4. **Average Strain Calculation**:
\[
e(x_j)=\frac{\iint_{A_i}e(r)\,dA}{\iint_{A_i}dA}
\]

5. **Goodness - of - Fit Function**:
\[
G=\sum_{j = 1}^{K}(e(x_j)-\epsilon(x_j))^{2}
\]

6. **Minimization Condition**:
\[
\frac{\partial G}{\partial c_i}=0
\]

Through these formulas, the authors achieve the goal of reconstructing the strain distribution from the measured data.