Abstract:Purpose : Establish a technique for simultaneous interrupted volumetric imaging of internal structure and time-resolved full-field surface strain measurements during in-situ X-ray micro-computed tomography (XCT) experiments. This enables in-situ testing of stiff materials with large forces relative to the compliance of the in-situ load frame, which might exhibit localization (e.g., necking, compaction banding) and other inhomogeneous behaviors. Methods : The system utilizes a combination of in-situ XCT, 2D X-ray imaging, and particle tracking to conduct volumetric imaging of the internal structure of a specimen with interrupted loading and surface strain mapping during loading. Critically, prior to the laboratory-scale XCT experiments, specimens are speckled with a high-X-ray-contrast powder that is bonded the surface. During in-situ loading, the XCT system is programmed to capture sequential 2D X-ray images orthogonal to the speckled specimen surface. A single particle tracking (SPT) or digital image correlation (DIC) algorithm is used to measure full-field surface strain evolution throughout the time-sequence of images. At specified crosshead displacements, the motion and 2D image sequence is paused for volumetric XCT image collection. Results : We show example results on a micro-tensile demonstration specimen additive manufactured from Inconel 718 nickel-chrome alloy. Results include XCT volume reconstructions, crosshead-based engineering stress, and full-field strain maps. Conclusion : We demonstrate an in-situ technique to obtain surface strain evolution during laboratory-scale XCT testing and interrupted volumetric imaging. This allows closer investigation of, for example, the effect of micro-pores on the strain localization behavior of additive manufactured metal alloys. In addition to describing the method using a representative test piece, the dataset and code are published as open-source resources for the community.

Energy Resolved Neutron Imaging for Strain Reconstruction using the Finite Element Method

Bayesian non-parametric Bragg-edge fitting for neutron transmission strain imaging

Neutron Bragg edge tomography characterisation of residual strain in a laser-welded Eurofer97 joint

Recovering the second moment of the strain distribution from neutron Bragg edge data

Direct inversion of the Longitudinal Ray Transform for 2D residual elastic strain fields

A New Residual Strain Mapping Program Using Energy Dispersive X-Ray Diffraction at the Advanced Photon Source

The Principle of Strain Reconstruction Tomography: Determination of Quench Strain Distribution from Diffraction Measurements

Characterization of Crystallographic Structures Using Bragg-Edge Neutron Imaging at the Spallation Neutron Source

Neutron diffraction methods for the study of residual stress fields

Applying Neutron Transmission Physics and 3D Statistical Full-Field Model to Understand 2D Bragg-edge Imaging

A Technique for In-Situ Displacement and Strain Measurement with Laboratory-Scale X-Ray Computed Tomography

Nanoscale lattice strains in self-ion implanted tungsten

Diffraction-Based Multiscale Residual Strain Measurements

Reconstruction of three-dimensional strain field in an asymmetrical curved core-shell hetero-nanowire

The Use of Time-of-Flight Neutron Bragg Edge Imaging to Measure the Residual Strains in W/Cu Dissimilar Joints for Fusion Reactors

Tomographic eigenstrain reconstruction for full-field residual stress analysis in large scale additive manufacturing parts

2D single crystal Bragg-dip mapping by time-of-flight energy-resolved neutron imaging on IMAT@ISIS

Scanning electron diffraction tomography of strain

Two-Dimensional Strain Mapping with Scanning Precession Electron Diffraction: An Investigation into Data Analysis Routines

Towards a quantitative determination of strain in Bragg Coherent X-ray Diffraction Imaging: artefacts and sign convention in reconstructions