Abstract:The presence of discontinuities and randomly distributed pores in basalt specimens greatly affects their engineering properties, such as the failure mechanism and strength. Therefore, investigating the mechanical and fracture behaviors of basalt affected by the pre-existing defects is important for underground engineering, mining engineering, foundation engineering, and rock breaking and blasting. Laboratory tests have been widely used to research the failure mechanism of rocks under different conditions. However, it is difficult to clearly show the internal or spatial crack evolution during rock failure process in laboratory tests. Recently, X-ray computerized tomography (CT) and numerical tests have been used to detect the internal microstructures of rock specimens and to study their failure mechanism and strength. In addition, tensile strength is an important mechanical property of rock material. The direct tensile test is theoretically the simplest and most effective method for understanding the tensile behavior of rock. However, it is difficult to carry out in practical condition, because the sample processing and test procedures are complicated, also the experimental process of each sample cannot be repeated and has limited results. Due to the opacity of rocks, it is difficult to examine the three-dimensional internal structures of rocks through traditional physical and numerical experiments. In the present research, a 3D numerical method was proposed for simulating porous rock failure based on CT technology, the edge detection algorithm, filtering algorithm, and 3D matrix mapping method. Direct tensile tests were carried out based on the parallel finite element method to study the effect of the porosity and pore distribution on the failure mechanism and tensile strength. The results indicate that initial cracks at the beginning of loading usually occur in pores, and then with the raising of load the initial cracks propagate along the direction perpendicular to the loading direction and eventually form macroscopic tensile cracks. The porosity and pore distribution have significant influences on the position of macroscopic tensile cracks. The acoustic emission (AE) event numbers and the accumulative AE energy are gradually decreased as the porosity increased. In addition, the brittle failure primarily determines the tensile failure mode and the presence of pores weakens the tensile strength of basalt samples.

3D Digital Analysis of Cracking Behaviors of Rocks through 3D Reconstruction Model under Triaxial Compression

Establishment of Numerical Cracking Constitutive Models Using 3D Reconstruction and X-ray CT Images of Geomaterials

Three-dimensional Reconstruction and Growth Factor Model for Rock Cracks under Uniaxial Cyclic Loading/Unloading by X-ray CT

3D meso-scale fracture modelling and validation of concrete based on in-situ X-ray Computed Tomography images using damage plasticity model

Spatial Propagation Effects of 3D Cracks on Mechanical Properties of Geomaterials under Uniaxial Compression by 3D Reconstruction

Research on the crack 3D reconstruction of rock CT fault series images and rock damage characters

Analyzing Fracture Properties of the 3D Reconstructed Model of Porous Rocks

Study on the progressive fracturing in soil and rock mixture under uniaxial compression conditions by CT scanning

Microscopic Cracking Behaviors of Rocks under Uniaxial Compression with Microscopic Multiphase Heterogeneity by Deep Learning

Study on rock fracture behavior under hydromechanical loading by 3-D digital reconstruction

3-D X-ray Computed Tomography on Failure Characteristics of Rock-Like Materials under Coupled Hydro-Mechanical Loading

Research on Crack Evolution Law and Mechanical Analysis of Three Cracked Rock Masses Subjected to Compression Load

Digital measurement of 2D and 3D cracks in sandstones through improved pseudo color image enhancement and 3D reconstruction method

Three-Dimensional in Situ XCT Characterisation and FE Modelling of Cracking in Concrete

A True Triaxial Compression-Induced Microcracking Model for Evaluating Short-Term Progressive and Long-Term Creep Failures of Brittle Rock

Numerical Modeling of Jointed Rock under Compressive Loading Using X-Ray Computerized Tomography

Analysis of fracture properties of three-dimensional reconstructed rock model using hierarchical-fractal annealing algorithm

Meso-damage Cracking Characteristics Analysis for Rock and Soil Aggregate with CT Test

Three-dimensional Microscopic Model Reconstruction of Basalt and Numerical Direct Tension Tests

Mechanical Behavior and Fracture Evolution Mechanism of Composite Rock under Triaxial Compression: Insights from Three-Dimensional DEM Modeling

3D Reconstruction for X-ray CT Sectional Series Images of Cracks within Rocks