Abstract:A modified sol-gel process for lead zirconate titanate (PZT) thin film deposition has been presented to overcome the problems of film cracking, short-circuiting and diffusion of PZT to substrate. In the modified sol-gel process, we pattern the pyrolyzed PZT thin film by wet etching before every treatment of post-annealing for crystallization. The modification brings two advantages: film cracking is eliminated due to the reduction of internal stress; PZT diffusion to substrate is avoided due to removing PZT film from the areas without Pt buffer layer before high-temperature post-annealing treatment. The modified sol-gel process is applied to fabrication of piezoelectric cantilever, which includes sputtering and patterning top and bottom electrodes, depositing PZT layer by the modified sol-gel process and releasing cantilever structure by a double side deep reaction ion etching process. After the fabrication, performances of PZT thin film such as hysteresis loop upon polarization and X-ray diffraction pattern are evaluated. Finally, resonant frequency is measured for the fabricated piezoelectric cantilever to verify its self-exited capability for future applications as micro sensors or actuators. These experimental results indicate that the modified sol-gel process for PZT deposition can greatly improve quality and yield rate of the fabrication of piezoelectric devices without causing any adverse effect.

Design and Fabrication of PZT Piezoelectric Thin Film Micro-switch based on Silicon

Design and Optimization of Micro-switch Actuated by PZT Piezoelectric Cantilever Based on Si

Structural Design and Testing of Silicon-Based PZT Thin Film Micro-Sensors

Fabrication of high-aspect-ratio PZT structure by nanocomposite sol-gel method for laterally-driven piezoelectric MEMS switch

Fabrication and Characterization of Piezoelectric Cantilever for Micro Transducers

Research of Microactuator with PZT Prepared by Sol-gel

PZT Piezoelectric Function Structure on Silicon Sustbrate

Fabrication and Characterization of Microcantilever Integrated with PZT Thin Film Sensor and Actuator

Study of Fabrication Process of A Micro-Electrostatic Switch and Its Application to A Micromechanical V-F Converter

High Performance PZT Piezoelectric Thick Films and Micro-Technology Research of MEMS Microactuator

Preparation and Micro-fabrication of PZT Piezoelectric Thin Film for Micro-sensor

A Silicon-based Scanning Micromirror Actuated by Piezoelectric Cantilevers Using PZT

Study on technology of zinc oxide piezoelectric thin film device with surface micromachining substrate

Fabrication of PZT microdevices using a high-yield sol-gel process

Polysilicon Micromachined Switch

Applications of PZT Pieoelectric Thin Films in Microsensors

A Novel Design and Fabrication of V Type Valve Microactuator with PZT Prepared by Sol-Gel

High Quality PZT Thick Films Using Silicon Mold Technique for MEMS Applications

Fabrication and Characterisation of Piezoelectric Microcantilever Probe

Study of Fabrication and Etching Processes of PZT Thin Films on Silicon