HR-TEM of Carbon Network, Towards Individual C-C Bond Imaging

K. Suenaga,Y. Sato,Z. Liu,M. Koshino,C. Jin

DOI: https://doi.org/10.1017/s1431927609092460

IF: 4.0991

2009-01-01

Microscopy and Microanalysis

Abstract:Extended abstract of a paper presented at Microscopy and Microanalysis 2009 in Richmond, Virginia, USA, July 26 – July 30, 2009

What problem does this paper attempt to address?

In-Situ HR-TEM Characterizations on Individual Carbon Nanotubes During Its Manipulation, Deformation and Growth

Chuanhong Jin,Kazu Suenaga,Sumio Iijima

DOI: https://doi.org/10.1017/s1431927609092691

IF: 4.0991

2009-01-01

Microscopy and Microanalysis

Abstract:Extended abstract of a paper presented at Microscopy and Microanalysis 2009 in Richmond, Virginia, USA, July 26 – July 30, 2009
High-Resolution Transmission Electron Microscopy Imaging Of Carbon Nanostructures

Kazu Suenaga,Yuta Sato,Zheng Liu,Masanori Koshino,Chuanhong Jin

2012-01-01

Abstract:Here we show how a high-resolution transmission electron microscopy can be applied to characterize the carbon nanostructures. Direct imaging of the hexagonal network of carbon nanotube enables us to determine the chiral index and to visualize the topological defects, such as pentagons and heptagons. Individual molecular imaging has also become possible, and atomic structure of fullerene molecules (C-60 and C-80) has been successfully identified at a single-molecular basis. Some recent progress for in situ observation of the carbon nanotube/fullerene growth and the defect dynamics is also presented.
Resolving the Individual Carbon Atoms of Graphene Monolayer by REW Software

林芳,金传洪

DOI: https://doi.org/10.3969/j.issn.1000-6281.2010.02.003

2010-01-01

Abstract:By means of the electron beam irradiation-induced layer-by-layer sputtering,graphene monolayers were successfully prepared inside the transmission electron microscope (TEM).It is difficult to directly and clearly resolve single carbon atoms from the pristine aberration-corrected high resolution TEM (HRTEM) images,due to the relative lower signal-to-noise ratio.Therefore,the exit-wave reconstruction method was employed for the through-focal image series.A hexagonal lattice of carbon atoms could be unambiguously resolved from the reconstructed phase image.The image processing,including the HRTEM simulation and HRTEM image reconstruction,are performed using a self-developed software of REW.
In-situ Fabrication, Manipulation and Property Measurements of Single Nanotubes and Nanowires with Near Atomic Resolution

L-M Peng,Q Chen,JY Wang,MS Wang,ZY Zhang,CH Jin,XL Wei

DOI: https://doi.org/10.1017/s1431927606069510

IF: 4.0991

2006-01-01

Microscopy and Microanalysis

Abstract:Extended abstract of a paper presented at Microscopy and Microanalysis 2006 in Chicago, Illinois, USA, July 30 – August 3, 2005
Observations of Carbon Nanotube Field Emission Failure in the Transmission Electron Microscope

MS Wang,JY Wang,CH Jin,Q Chen,LM Peng

DOI: https://doi.org/10.4028/www.scientific.net/msf.475-479.4071

2005-01-01

Materials Science Forum

Abstract:The failure of individual multiwall carbon nanotubes (CNTs) during electron field emission was investigated in situ inside the transmission electron microscope (TEM). Long time emission of a single CNT at the level of tens µA or higher may lead to unrecoverable damage to the CNT. High-resolution TEM observations of the emission failure process shown that the failure was usually companied by structure damage or break of the CNT, and the failure or degradation of the emission characteristics of the CNT was typically initiated at the CNT/substrate contact, defect site or at the open end via the field evaporation or oxidation of the tip of the CNT.
Carbon Nanotube - Substrate Interface Characteristics Studied Via TEM

TS Zheleva,SJ Kilpatrick,MH Ervin,X Li,A Cao,PM Ajayan

DOI: https://doi.org/10.1017/s1431927606067262

IF: 4.0991

2006-01-01

Microscopy and Microanalysis

Abstract:Extended abstract of a paper presented at Microscopy and Microanalysis 2006 in Chicago, Illinois, USA, July 30 – August 3, 2005
Quantitative analysis of electron field-emission characteristics of individual carbon nanotubes: The importance of the tip structure

Mingsheng Wang,Lianmao Peng,Jingyun Wang,Chuanhong Jin,Qing Chen

DOI: https://doi.org/10.1021/jp054971i

2006-01-01

Abstract:Electron field-emission measurements on individual carbon nanotubes (CNTs) were performed inside the transmission electron microscope (TEM). The field-emission characteristics of CNTs with different tip structures were compared, and their field conversion factor and emission area were studied systematically. It was found that the field-emission characteristics of a CNT depend sensitively on its tip structure, and in particular an opened CNT was shown to be superior to a capped CNT. High-resolution TEM observations revealed that the tip of an opened CNT may, in general, be regarded as being composed of irregular shaped graphitic sheets, and these graphitic sheets have been found to improve dramatically the field-emission characteristics, but the sharp edge may result in larger error in the calculated emission area. The influence of uncertainty in the work function of the CNTs on the field conversion factor and emission area calculation was also investigated.
Atom-Resolved Imaging of Carbon Hexagons of Carbon Nanotubes

Hongwei Zhu,Kazutomo Suenaga,Jinquan Wei,Kunlin Wang,Dehai Wwi

DOI: https://doi.org/10.1021/jp804385a

2008-01-01

Abstract:Atomic configurations of individual single-walled and double-walled carbon nanotubes have been obtained by high-resolution transmission electron microscopy with atomic sensitivity. A structural reconstruction is carried out by Fourier-filtered analysis of Moire patterns, and it is now possible to acquire the carbon honeycomb lattice images through all of the periphery of individual nanotubes. This visualization technique provides supplementary access in nanoscale characterizations by combining with scanning tunneling microscopy.
Atomic-Resolution Imaging of the Nucleation Points of Single-Walled Carbon Nanotubes

HW Zhu,K Suenaga,A Hashimoto,K Urita,K Hata,S Iijima

DOI: https://doi.org/10.1002/smll.200500200

IF: 13.3

2005-01-01

Small

Abstract:Points of view: The nucleation points of single-walled carbon nanotubes (SWNTs) are visualized on the atomic scale. The atomic structure of both the catalysts and the SWNTs growing from them are seen by HRTEM (see Figure) for the first time. The growth pathway extracted from a TEM image sequence demonstrates a root mechanism in SWNT growth. A best assignment of (31,14) for the chirality is obtained by means of inverse fast Fourier transform (IFFT) analysis.
Atomic-scale investigation of carbon-based materials by gentle transmission electron microscopy

Pei-zhi Liu,Bing Hao,Hai-xia Zhang,Bing-she Xu,Jun-jie Guo

DOI: https://doi.org/10.1016/s1872-5805(21)60040-9

IF: 5.7

2021-06-01

New Carbon Materials

Abstract:Although carbon-based materials, such as graphene, metal-organic frameworks (MOFs), polymers and biomolecules, have aroused increasing scientific interest in the fields of physics, chemistry, materials science and molecular biology, their atomic-scale observation is still a challenge due to their structural instability under the electron beam. Ambiguous atomic arrangements have critically limited the fundamental understanding on these materials and their potential applications in electronics, mechanics, thermodynamics, catalysis, bioscience and medicine. Very recently, revolutionary sub-Ångström resolution achievements of transmission electron microscopy (TEM) using a low voltage, a low electron dose, or a cryogenic environment have greatly facilitated the atomic-scale structural and chemical examination of electron beam sensitive materials. In particular, the ability to image light elements atom by atom gives unprecedented insight into the structures and properties of novel carbon-based materials. In this review, the recent developments in advanced TEM combined with various imaging and spectroscopy techniques, and their use in examining graphene-based materials, MOFs, polymers, and biomacromolecules are summarized and discussed. The current challenges in materials research and trends for the future design of TEM equipment are outlined, which is expected to provide a deeper understanding of structure-performance relationships and the discovery of new carbon materials.

materials science, multidisciplinary
New Metastable Carbon Phases Observed by HRTEM

Duan Luo,Liuxiang Yang,Hongxian Xie,Ho-kwang Mao,Jianguo Wen

DOI: https://doi.org/10.1017/s1431927619009371

IF: 4.0991

2019-01-01

Microscopy and Microanalysis

Abstract:Journal Article New metastable carbon phases observed by HRTEM Get access Duan Luo, Duan Luo Center for Nanoscale Materials, Argonne National Laboratory, Argonne, IL 60439Key Laboratory of Ultra-fast Photoelectric Diagnostics Technology, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an 710119, ChinaUniversity of Chinese Academy of Sciences, Beijing 100049, China dluo@anl.gov Search for other works by this author on: Oxford Academic Google Scholar Liuxiang Yang, Liuxiang Yang Center for High Pressure Science and Technology Advanced Research, Beijing, 100094, ChinaGeophysical Laboratory, Carnegie Institution of Washington, Washington, DC, 20015, USA Search for other works by this author on: Oxford Academic Google Scholar Hongxian Xie, Hongxian Xie Hebei University of Technology, Tianjin 300132, China Search for other works by this author on: Oxford Academic Google Scholar Ho-kwang Mao, Ho-kwang Mao Center for High Pressure Science and Technology Advanced Research, Beijing, 100094, ChinaGeophysical Laboratory, Carnegie Institution of Washington, Washington, DC, 20015, USA Search for other works by this author on: Oxford Academic Google Scholar Jianguo Wen Jianguo Wen Center for Nanoscale Materials, Argonne National Laboratory, Argonne, IL 60439 Search for other works by this author on: Oxford Academic Google Scholar Microscopy and Microanalysis, Volume 25, Issue S2, 1 August 2019, Pages 1728–1729, https://doi.org/10.1017/S1431927619009371 Published: 01 August 2019
Direct Mechanical Measurement of the Tensile Strength and Elastic Modulus of Multiwalled Carbon Nanotubes

BG Demczyk,Wang Ym,John Cumings,M Hetman,Wei-Qiang Han,A. Zettl,R.O. Ritchie

DOI: https://doi.org/10.1017/s1431927606062933

IF: 4.0991

2006-01-01

Microscopy and Microanalysis

Abstract:Extended abstract of a paper presented at Microscopy and Microanalysis 2006 in Chicago, Illinois, USA, July 30 – August 3, 2006
The Hrem Observation of Cross-Sectional Structure of Carbon Nanotubes

SQ Feng,DP Yu,G Hu,XF Zhang,Z Zhang

DOI: https://doi.org/10.1016/s0022-3697(97)00085-1

IF: 4.383

1997-01-01

Journal of Physics and Chemistry of Solids

Abstract:Cross-sectional structural features of carbon nanotubes have been investigated by high resolution electron microscopy (HREM). Carbon nanotube-bundles with 0.2–0.6 mm in diameter and 5–10 mm in length were produced by means of an arc-discharge method, which is suitable for preparing TEM cross-sectional samples of carbon nanotubes. Our HREM observations have shown that most of carbon nanotubes have a polyhedral and elliptical shape in a cross section, and there are many defects in the microstructure of carbon nanotubes, including edge-type dislocations and variable spacing between adjacent tube sheets, revealing that the seamless cylindric and scroll-shaped graphene sheets co-exist within the same nanotube. The abnormal structure features are closely related to the non-equilibrium growth conditions of carbon nanotubes in the arc-discharge process, and also to the accommodations of various strains taking place simultaneously in tube sheets.
Structural identification of single and double-walled carbon nanotubes by high-resolution transmission electron microscopy

Hongwei Zhu,Kazutomo Suenaga,Ayako Hashimoto,Kouki Urita,Sumio Iijima

DOI: https://doi.org/10.1016/j.cplett.2005.06.119

IF: 2.719

2005-01-01

Chemical Physics Letters

Abstract:A specially fabricated high-resolution imaging technique is used to obtain atomic-resolution TEM images of single-walled carbon nanotubes and double-walled carbon nanotubes. Starting from the optical diffractions (Fourier transformations) of these TEM images, we perform an atom-resolved reconstructing operation in order to get the perfect lattice images of individual tubes. A new approach to accurately determinate tube chiralities is proposed here involving relevant analysis based on the information of tube diameters and index angles extracted from their TEM images and their optical diffractions with a help of systematic image simulations.
3D Structure Determination from Hrtem and Electron Diffraction Tomography

Xiaodong Zou,Daliang Zhang,Peter Oleynikov,Junliang Sun,Sven Hovmoller

DOI: https://doi.org/10.1017/s1431927609099413

IF: 4.0991

2009-01-01

Microscopy and Microanalysis

Abstract:Extended abstract of a paper presented at Microscopy and Microanalysis 2009 in Richmond, Virginia, USA, July 26 – July 30, 2009
Transmission Electron Microscope As an Ultimate Tool for Nanomaterial Property Studies

Naoyuki Kawamoto,Dai-Ming Tang,Xianlong Wei,Xi Wang,Masanori Mitome,Yoshio Bando,Dmitri Golberg

DOI: https://doi.org/10.1093/jmicro/dfs078

2013-01-01

Abstract:In this review, a non-standard application of high-resolution transmission electron microscope (HRTEM), namely the creation of so-called NanoLaboratory for the nanomaterial property studies within its pole piece, is presented. The most modern research trends with respect to nanotube, graphene and nanowire, as well as electrical, mechanical and electromechanical properties are demonstrated. In addition, the unique possibilities of modeling real technological processes inside HRTEM, for example, the performance of Li-ion batteries, are illustrated. The contribution particularly highlights the recent research endeavors of our Tsukuba group in line with all the above-mentioned directions of in situ TEM.
Electron Microscopy of Nanodevices: in Situ and Ex Situ Characterization of Structure and Transport Properties of Carbon Nanotubes

JM Zuo,T Kim,Q Chen,LM Peng,EA Olson

DOI: https://doi.org/10.1017/s1431927608082445

IF: 4.0991

2008-01-01

Microscopy and Microanalysis

Abstract:Extended abstract of a paper presented at Microscopy and Microanalysis 2008 in Albuquerque, New Mexico, USA, August 3 – August 7, 2008
Combination of Confocal Raman Spectroscopy and Electron Microscopy on the Same Individual Bundles of Single-Walled Carbon Nanotubes

CY Jiang,JX Li,JL Zhao,U Kolb,A Mews

DOI: https://doi.org/10.1021/nl025738o

IF: 10.8

2002-01-01

Nano Letters

Abstract:We report a method to investigate the same individual single-walled carbon nanotube (SWNT) bundles with both transmission electron microscopy (TEM) and Raman spectroscopy. Free-standing individual bundles are obtained by depositing a solution of suspend SWNTs on a carbon film with a regular pattern of holes, which can be localized by TEM and also by confocal Raman microscopy. While most of the TEM images predict that the bundles consist of tubes with a similar diameter, we will show that occasionally a certain tube diameter can be associated with a particular radial breathing mode frequency of the Raman spectrum.
Carbon-nanotube-assisted transmission electron microscopy characterization of aerosol nanoparticles

S MAO,G LU,J CHEN

DOI: https://doi.org/10.1016/j.jaerosci.2008.10.001

IF: 4.586

2009-01-01

Journal of Aerosol Science

Abstract:Aerosol nanoparticles draw great attention due to their unique physico-chemical properties that can be harnessed for innovative applications as well as for their potential impact on public health and the environment. Microscopic characterization of these particles is critically important to understand the unique particle properties and their interaction with biological systems. Here we report on a simple and efficient method for size, morphology, and crystallinity analyses of aerosol nanoparticles through transmission electron microscopy (TEM). The method uses carbon nanotubes (CNTs) as the particle support on conventional TEM grids. The CNT support significantly improves the quality of high resolution TEM (HRTEM) imaging due to the unique properties of CNTs, the high probability of particles sitting at the edge of CNTs, and the minimization of the interference interaction between the electron beam and the supporting substrate. The improved HRTEM images are useful for detailed characterization of nanoparticles, and particularly suitable for analyzing core-shell nanoparticles.
Field emission patterns with atomic resolution of single-walled carbon nanotubes by field emission microscopy

Shimin Hou,Zhaoxiang Zhang,Weimin Liu,Ji Luo,Gengmin Zhang,Zhennan Gu,Xingyu Zhao,Lianmao Peng,Jinlei Wu,Zengquan Xue

DOI: https://doi.org/10.1360/03yg9005

2003-01-01

Science in China Series G: Physics, Mechanics and Astronomy

Abstract:Electron emission properties of single-walled carbon nanotubes (SWCNTs) assembled on a tungsten tip were investigated using field emission microscopy (FEM). The transmission electron microscopy (TEM) micrograph confirmed the existence of an SWCNT bundle on the W tip. Under appropriate experimental conditions, a series of FEM patterns with atomic resolution were obtained. These patterns arose possibly from the field emission of the open end of an individual (16,0) SWCNT protruding from the SWCNT bundle. The magnification factor and the resolution under our experimental conditions were calculated theoretically. If the value of the compression factor β was set at β=1.76, the calculated value of the magnification factor was in agreement with the measured value. The resolving power of FEM was determined by the resolution equation given by Gomer. The resolution of 0.277 nm could be achieved under the typical electric field of 5.0×10 7 V/cm, which was close to the interatomic separation 0.246 nm between carbon atoms along the zigzag edge at the open end for the (16, 0) SWCNT. Consequently, our experimental results were further supported by our theoretical calculation.

HR-TEM of Carbon Network, Towards Individual C-C Bond Imaging

In-Situ HR-TEM Characterizations on Individual Carbon Nanotubes During Its Manipulation, Deformation and Growth

High-Resolution Transmission Electron Microscopy Imaging Of Carbon Nanostructures

Resolving the Individual Carbon Atoms of Graphene Monolayer by REW Software

In-situ Fabrication, Manipulation and Property Measurements of Single Nanotubes and Nanowires with Near Atomic Resolution

Observations of Carbon Nanotube Field Emission Failure in the Transmission Electron Microscope

Carbon Nanotube - Substrate Interface Characteristics Studied Via TEM

Quantitative analysis of electron field-emission characteristics of individual carbon nanotubes: The importance of the tip structure

Atom-Resolved Imaging of Carbon Hexagons of Carbon Nanotubes

Atomic-Resolution Imaging of the Nucleation Points of Single-Walled Carbon Nanotubes

Atomic-scale investigation of carbon-based materials by gentle transmission electron microscopy

New Metastable Carbon Phases Observed by HRTEM

Direct Mechanical Measurement of the Tensile Strength and Elastic Modulus of Multiwalled Carbon Nanotubes

The Hrem Observation of Cross-Sectional Structure of Carbon Nanotubes

Structural identification of single and double-walled carbon nanotubes by high-resolution transmission electron microscopy

3D Structure Determination from Hrtem and Electron Diffraction Tomography

Transmission Electron Microscope As an Ultimate Tool for Nanomaterial Property Studies

Electron Microscopy of Nanodevices: in Situ and Ex Situ Characterization of Structure and Transport Properties of Carbon Nanotubes

Combination of Confocal Raman Spectroscopy and Electron Microscopy on the Same Individual Bundles of Single-Walled Carbon Nanotubes

Carbon-nanotube-assisted transmission electron microscopy characterization of aerosol nanoparticles

Field emission patterns with atomic resolution of single-walled carbon nanotubes by field emission microscopy