Abstract:Reforming of hydrocarbons and oxygenated hydrocarbons is a potential way to supply H2 for portable and household fuel cell applications. Of course, avoiding the use of toxic fuels is desirable. The extremely low toxicity of dimethoxymethane (DMM) may make it a preferred fuel for portable and household H2 sources. We found that DMM can be effectively reformed to hydrogen on specially designed complex catalysts with bifunctional characters. The complex catalysts consisted of a traditional Cu–ZnO/γ-Al2O3 for the reforming of methanol and an acidic component for the hydrolysis of DMM. The acidity of the acidic component was found to be essential for the complex catalyst. A significant amount of dimethyl ether (DME) was produced when a strong solid acid such as H-ZSM-5 was used with the Cu–ZnO/γ-Al2O3 for the reforming of DMM. On the other hand, γ-Al2O3 exhibited low activity for the hydrolysis of DMM, resulting in the low efficiency of the complex catalyst. Tests showed that the acidic carbon nanofibers (H-CNF) seemed suitable as the acidic component in the complex catalysts. In fact, the complex catalysts Cu–ZnO/γ-Al2O3–H-CNF were found to exhibit excellent performance for the reforming of DMM. The rate of H2 production from the reforming of DMM on the Cu–ZnO/γ-Al2O3–H-CNF could be as good as that from the reforming of methanol over the traditional Cu–ZnO/γ-Al2O3, whereas the reforming of DMM over the Cu–ZnO/γ-Al2O3 without an acidic component exhibited low activity and produced a significant amount of DME. Mechanistic studies showed that DME was produced from DMM on the Cu surface when no additional acidic component was present.

Production of hydrogen from dimethyl ether over catalysts

Steam Reforming of Dimethyl Ether over Coupled Catalysts of CuO-ZnO-Al2O3-ZrO2 and Solid-acid Catalyst

Steam Reforming of Dimethyl Ether over Coupled Zsm-5 and Cu-Zn-Based Catalysts

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Production of hydrogen by catalytic reforming of dimethoxymethane over bifunctional catalysts

Equilibrium Composition of Dimethyl Ether Steam Reforming to Hydrogen

Assembly of hydrolysis, activation and reforming sites boosting steam reforming of DME over ZnO/TiO 2 catalysts

Oxide-modified HZSM-5 for efficient production of hydrogen via steam reforming of dimethyl ether

Dimethyl Ether Synthesis from CO2 Hydrogenation on a CuO−ZnO−Al2O3−ZrO2/HZSM-5 Bifunctional Catalyst

A highly durable catalyst system for hydrogen production from dimethyl ether

Producing hydrogen by catalytic steam reforming of methanol using non-noble metal catalysts

Hydrogen Production from Steam Reforming of Hydrocarbons over Alkaline-Earth Metal-Modified Fe- or Ni-Based Catalysts

Research progress in hydrogen preparation by reforming dimethyl ether steam for fuel cell

Hydrogen-Rich Syngas Production via Dry and Steam Reforming of Methane in Simulated Producer Gas over ZSM-5-Supported Trimetallic Catalysts

Steam Reforming of Dimethyl Ether over CuO–ZnO–Al2O3–ZrO2 + ZSM-5: A Kinetic Study

Hydrogen Production Via Steam Reforming of Methanol on Cu/ZnO/Al2O3 Catalysts: Effects of Al2O3 Precursors

Development in Catalytic Systems in Hydrogen Production via Ethanol Steam Reforming

Steam reforming of ethanol for hydrogen production over NiO/ZnO/ZrO2 catalysts

Mechanism and catalytic performance for direct dimethyl ether synthesis by CO2 hydrogenation over CuZnZr/ferrierite hybrid catalyst

Hydrogen production and purification for dimethyl ether autothermal reformer using membrane reactor

Hydrogen production via acetic acid steam reforming over HZSM-5 and Pd/HZSM-5 catalysts and subsequent mechanism studies