Abstract:Methanol is a prospective hydrogen storage medium that holds the potential to address the challenges of hydrogen storage and transportation. However, hydrogen production via methanol steam reforming faces several key obstacles, including high reaction temperature (e.g., 250–300 °C) and low methanol conversion (at <200 °C), while the purification procedure of hydrogen is commonly required to obtain high-purity H2. A novel method of H2 absorption-enhanced steam reforming of methanol is proposed to overcome the challenges mentioned above. The method involves the absorption and separation of H2 using an absorbent to facilitate the forward shift of the reaction equilibrium and enhance reaction performance. A thermodynamic analysis using the equilibrium constant method presents that the separation of H2 can improve the methanol conversion rate and the total H2 yield. The feasibility of the method is validated through experiments in a fixed-bed reactor (4 mm diameter, 194 mm length) under the conditions of 200 °C and 1 bar. In the experiments, 1 g of bulk catalyst (CuO/ZnO/Al2O3) and 150 g of bulk hydrogen absorbent (Aluminum-doped lanthanum penta-nickel alloy, LaNi4.3Al0.7 alloy) are sequentially loaded into the reactor. As a proof of concept, a CO2 concentration of 84.10% is obtained in the reaction step of the first cycle, and a gas stream with an H2 concentration of 81.66% is obtained in the corresponding regeneration step. A plug flow reactor model considering the kinetics is developed to analyze the effects of the number of cycles and H2 separation ratio on the enhancement performance. The method indicates a high potential for commercialization given its low reaction temperature, high-purity H2, and membrane-free design.

Equilibrium Composition of Dimethyl Ether Steam Reforming to Hydrogen

Thermodynamic Simulation of Hydrogen Production from the Nano-Cao Reactive Sorption Enhanced Biomass Steam Reforming

The Characteristics of Sorption Enhanced Steam Methane Reforming for Hydrogen Production on a Complex Catalyst

Thermodynamic calculations for reactive sorption enhanced reforming of C2/C3 light hydrocarbons

Exergy Analysis of Hydrogen Production by Steam Reforming of Hydrocarbons and Its Carbon Emission Evaluation

Exergy analysis and CO2 emission evaluation for steam methane reforming

Production of hydrogen from dimethyl ether over catalysts

Steam Reforming of Dimethyl Ether over Coupled Catalysts of CuO-ZnO-Al2O3-ZrO2 and Solid-acid Catalyst

Steam Reforming of Dimethyl Ether over CuO–ZnO–Al2O3–ZrO2 + ZSM-5: A Kinetic Study

Steam Reforming of Dimethyl Ether over Coupled Zsm-5 and Cu-Zn-Based Catalysts

Design and optimization of spiral heated tubular dimethyl ether (DME) steam reforming reactor

Equilibrium calculations for direct synthesis of dimethyl ether from syngas

Steam, dry and autothermal methane reforming for hydrogen production: A thermodynamic equilibrium analysis

Hydrogen production and purification for dimethyl ether autothermal reformer using membrane reactor

Design and optimization of reforming hydrogen production reaction system for automobile fuel cell

Steam Reforming of Acetic Acid for Hydrogen Production: Thermodynamic Calculations

Design and optimization of hydrogen production system model for dimethyl ether self-heating steam reforming

Absorption-Enhanced Methanol Steam Reforming for Low-Temperature Hydrogen Production with Carbon Capture

A highly durable catalyst system for hydrogen production from dimethyl ether

Study on the Impact of Methanol Steam Reforming Reactor Channel Structure on Hydrogen Production Performance

Synthesis of dimethyl ether from greenhouse gas CO_2