Abstract:Methanol steam reforming coupled with an efficient hydrogen purification technology to produce high purity hydrogen that feeds for hydrogen fuel cells is an attractive approach to realizing distributed power generation. However, the harmony of catalytic reforming and hydrogen separation with respect to thermodynamics is still an issue. In this work, in order to construct an integrated methanol steam reforming (MSR) reactor for high purity hydrogen production, CuCe/Al2O3 was synthesized by a hydrothermal-impregnated method and a Pd membrane supported by a porous ceramic using the electroless plating method. The results revealed that the catalytic activity and high temperature stability for methanol steam reforming were evidently improved by tuning the copper dispersion, porous structure and the crystal phase. The coupling range with palladium membrane operating temperature was widened. CuCe/Al2O3 presented an excellent stability with a better carbon deposition resistance for the long-term tests than Cu/Al2O3, which exhibited 836.68 μmol/gcat. min of H2 production with low carbon deposition (3.38 wt%) and lower CO emission (0.48 vol%). A 10 μm thick Pd membrane that was deposited on the ceramic support displayed dense and even surface morphology. The effect of palladium membrane structure on hydrogen separation was analyzed. In addition, the influence of temperature on coupling was discussed. Ultimately, high purity of H2 (99.36 vol%) was achieved at 400 °C by integrating the Pd membrane reactor with methanol steam reforming. The internal temperature distribution of the reactor and the effects of feeding conditions were also investigated. This work might offer certain reference for the development of the future distributed integrated hydrogen power generation system, especially in the application of electric vehicles and on-site electricity.

Hydrogen production and purification for dimethyl ether autothermal reformer using membrane reactor

Hydrogen production and temperature control for DME autothermal reforming process

Hydrogen Permeation Performance of a Pd-Ag Membrane Reactor in Dimethyl Ether Steam Reforming System

Development of Pure Hydrogen Generation System Based on Methanol Steam Reforming and Pd Membrane

Production of hydrogen from dimethyl ether over catalysts

Catalysts for Dimethyl Ether Reforming to Hydrogen (A Review)

Design and optimization of hydrogen production system model for dimethyl ether self-heating steam reforming

Equilibrium Composition of Dimethyl Ether Steam Reforming to Hydrogen

Hydrogen Produced from Simulated Biogas Using a Membrane Reactor with a Dimethoxydimethylsilane-Derived Silica Membrane Operated under Pressure and Without Sweep Gas

Configuration of coupling methanol steam reforming over Cu-based catalyst in a synthetic palladium membrane for one-step high purity hydrogen production

Absorption-Enhanced Methanol Steam Reforming for Low-Temperature Hydrogen Production with Carbon Capture

Pd-Ag-Au-Ni Membrane Reactor For Methoxymethane Steam Reforming

Membrane reformer technology for sustainable hydrogen production from hydrocarbon feedstocks

Hydrogen Production by Steam Reforming of Methane in Biogas Using Membrane Reactors with Dimethoxydimethylsilane-derived Silica Membranes Prepared by Chemical Vapor Deposition

Thermodynamic Evaluation of Glycerol Autothermal Reforming in Membrane Reactors

Scale-up of Amine-Containing Membranes for Hydrogen Purification for Fuel Cells

A highly durable catalyst system for hydrogen production from dimethyl ether

Advance in Onboard Reforming Technology of DME to Hydrogen

PRODUCING HYDROGEN FROM JET-A FUEL IN A REACTOR WITH INTEGRATED AUTOTHERMAL REFORMING AND WATER-GAS SHIFT

Experiment on the Performance of Steam Reforming by Dimethyl-ether

Steam Reforming of Dimethyl Ether over Coupled Catalysts of CuO-ZnO-Al2O3-ZrO2 and Solid-acid Catalyst