Abstract:Reforming of hydrocarbons and oxygenated hydrocarbons is a potential way to supply H2 for portable and household fuel cell applications. Of course, avoiding the use of toxic fuels is desirable. The extremely low toxicity of dimethoxymethane (DMM) may make it a preferred fuel for portable and household H2 sources. We found that DMM can be effectively reformed to hydrogen on specially designed complex catalysts with bifunctional characters. The complex catalysts consisted of a traditional Cu–ZnO/γ-Al2O3 for the reforming of methanol and an acidic component for the hydrolysis of DMM. The acidity of the acidic component was found to be essential for the complex catalyst. A significant amount of dimethyl ether (DME) was produced when a strong solid acid such as H-ZSM-5 was used with the Cu–ZnO/γ-Al2O3 for the reforming of DMM. On the other hand, γ-Al2O3 exhibited low activity for the hydrolysis of DMM, resulting in the low efficiency of the complex catalyst. Tests showed that the acidic carbon nanofibers (H-CNF) seemed suitable as the acidic component in the complex catalysts. In fact, the complex catalysts Cu–ZnO/γ-Al2O3–H-CNF were found to exhibit excellent performance for the reforming of DMM. The rate of H2 production from the reforming of DMM on the Cu–ZnO/γ-Al2O3–H-CNF could be as good as that from the reforming of methanol over the traditional Cu–ZnO/γ-Al2O3, whereas the reforming of DMM over the Cu–ZnO/γ-Al2O3 without an acidic component exhibited low activity and produced a significant amount of DME. Mechanistic studies showed that DME was produced from DMM on the Cu surface when no additional acidic component was present.

Steam Reforming of Dimethyl Ether over Coupled Catalysts of CuO-ZnO-Al2O3-ZrO2 and Solid-acid Catalyst

Steam Reforming of Dimethyl Ether over Coupled Zsm-5 and Cu-Zn-Based Catalysts

Production of hydrogen from dimethyl ether over catalysts

Assembly of hydrolysis, activation and reforming sites boosting steam reforming of DME over ZnO/TiO 2 catalysts

Oxide-modified HZSM-5 for efficient production of hydrogen via steam reforming of dimethyl ether

Catalytic steam reforming of dimethyl ether for hydrogen production

Steam Reforming of Dimethyl Ether over CuO–ZnO–Al2O3–ZrO2 + ZSM-5: A Kinetic Study

Experiment on bi-functional catalyst of dimethyl ether steam reforming for hydrogen production

Application of Porous Anodic Alumina Monolith Catalyst in Steam Reforming of Dimethyl Ether: Cu/γ-Al2O3/Al Catalyst Degradation Behaviors and Catalytic Activity Improvement by Pre-Competition Impregnation Method

Steam reforming of dimethyl ether over a novel anodic γ-Al2O3 supported copper bi-functional catalyst

Experiment on the Performance of Steam Reforming by Dimethyl-ether

Hydrogen production via steam reforming of methanol using Cu/ZnO/Al 2 O 3 : Effect of catalyst synthesis method and Cu to Zn molar ratio on physico-chemical properties and catalytic performance

Improvement of a Mesh-Type Cu/Ni/γ-Al2O3/Al Catalyst for Steam Reforming of Dimethyl Ether by Metal (Fe, Zn or La) Addition for CO in Situ Removal

Mechanistic Insights into Methanol Steam Reforming over a ZnZr Oxide Catalyst with Improved Activity

Production of hydrogen by catalytic reforming of dimethoxymethane over bifunctional catalysts

Hydrogen Production Via Steam Reforming of Methanol on Cu/ZnO/Al2O3 Catalysts: Effects of Al2O3 Precursors

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

A highly durable catalyst system for hydrogen production from dimethyl ether

Innovative Cu/Ni/Fe/γ-Al2O3/Al Mesh-Type Catalyst and Compact Plate Reactor Design for Steam Reforming of Dimethyl Ether

Equilibrium Composition of Dimethyl Ether Steam Reforming to Hydrogen

Hydrogen Production from Steam Reforming of Hydrocarbons over Alkaline-Earth Metal-Modified Fe- or Ni-Based Catalysts