Abstract:Reforming of hydrocarbons and oxygenated hydrocarbons is a potential way to supply H2 for portable and household fuel cell applications. Of course, avoiding the use of toxic fuels is desirable. The extremely low toxicity of dimethoxymethane (DMM) may make it a preferred fuel for portable and household H2 sources. We found that DMM can be effectively reformed to hydrogen on specially designed complex catalysts with bifunctional characters. The complex catalysts consisted of a traditional Cu–ZnO/γ-Al2O3 for the reforming of methanol and an acidic component for the hydrolysis of DMM. The acidity of the acidic component was found to be essential for the complex catalyst. A significant amount of dimethyl ether (DME) was produced when a strong solid acid such as H-ZSM-5 was used with the Cu–ZnO/γ-Al2O3 for the reforming of DMM. On the other hand, γ-Al2O3 exhibited low activity for the hydrolysis of DMM, resulting in the low efficiency of the complex catalyst. Tests showed that the acidic carbon nanofibers (H-CNF) seemed suitable as the acidic component in the complex catalysts. In fact, the complex catalysts Cu–ZnO/γ-Al2O3–H-CNF were found to exhibit excellent performance for the reforming of DMM. The rate of H2 production from the reforming of DMM on the Cu–ZnO/γ-Al2O3–H-CNF could be as good as that from the reforming of methanol over the traditional Cu–ZnO/γ-Al2O3, whereas the reforming of DMM over the Cu–ZnO/γ-Al2O3 without an acidic component exhibited low activity and produced a significant amount of DME. Mechanistic studies showed that DME was produced from DMM on the Cu surface when no additional acidic component was present.

Steam Reforming of Dimethyl Ether over Coupled Zsm-5 and Cu-Zn-Based Catalysts

Steam Reforming of Dimethyl Ether over Coupled Catalysts of CuO-ZnO-Al2O3-ZrO2 and Solid-acid Catalyst

Production of hydrogen from dimethyl ether over catalysts

Steam Reforming of Dimethyl Ether over CuO–ZnO–Al2O3–ZrO2 + ZSM-5: A Kinetic Study

Assembly of hydrolysis, activation and reforming sites boosting steam reforming of DME over ZnO/TiO 2 catalysts

Oxide-modified HZSM-5 for efficient production of hydrogen via steam reforming of dimethyl ether

Hydrogen production via steam reforming of methanol using Cu/ZnO/Al 2 O 3 : Effect of catalyst synthesis method and Cu to Zn molar ratio on physico-chemical properties and catalytic performance

Dimethyl Ether Synthesis from CO2 Hydrogenation on a CuO−ZnO−Al2O3−ZrO2/HZSM-5 Bifunctional Catalyst

Methanol Steam Reforming for Hydrogen Production over CuZnZrOx: Promotion Effect of Cu

Mechanism and catalytic performance for direct dimethyl ether synthesis by CO2 hydrogenation over CuZnZr/ferrierite hybrid catalyst

Fe–Ni–Ce–Zr-modified CuO–ZnO catalyst for methanol steam reforming

Syntheses, catalytic performances and DFT investigations: A recent review of copper-based catalysts of methanol steam reforming for hydrogen production

Achieving efficient and robust catalytic reforming on dual-sites of Cu species

Optimizing CO 2 Hydrogenation to DME through Tailored Interfacial Interactions: Weakening Synergy in CuZnZr and Al-Modified SBA-15 Catalysts

Hydrogen Production Via Steam Reforming of Methanol on Cu/ZnO/Al2O3 Catalysts: Effects of Al2O3 Precursors

Production of hydrogen by catalytic reforming of dimethoxymethane over bifunctional catalysts

Achieving strong thermal stability in catalytic reforming of methanol over in-situ self-activated nano Cu2O/ZnO catalyst with dual-sites of Cu species

Complete liquid-phase preparation and characterization of Cu-Zn-Al-Zr slurry catalysts for synthesis of dimethyl ether

Effect of preparation method on the hydrogen production from methanol steam reforming over binary Cu/ZrO2 catalysts

Hydrogen-Rich Syngas Production via Dry and Steam Reforming of Methane in Simulated Producer Gas over ZSM-5-Supported Trimetallic Catalysts

A Highly Efficient Cu/Zno/Al2o3 Catalyst Via Gel-Coprecipitation of Oxalate Precursors for Low-Temperature Steam Reforming of Methanol