Abstract:A series of zirconia-supported copper oxide catalysts synthesized by decomposition of the oxalate precursors formed by oxalate gel-coprecipitation in alcoholic solution were extensively investigated in relation to their performance in methanol steam reforming. The combination of different techniques (N-2 adsorption, X-ray diffraction (XRD), N2O titration, H-2-TPR, diffuse reflectance Fourier transform infrared, Raman, and X-ray photoelectron spectroscopy) in the characterization of Cu/ZrO2 catalysts shows that the surface and structural characteristics of the zirconia phase as well as the dispersion and nature of the copper species depend strongly on the calcination temperature. Temperature-programmed reduction patterns reveal the presence of three types of copper species on the ZrO2 support. XRD results indicate that, depending on the calcination temperature, a substantial incorporation of Cu species into the zirconia lattice leading to a strong Cu-ZrO2 metal-support interaction may occur. The N2O titration reveals that the 550 degrees C calcined material exhibits the highest metallic copper surface area as compared to other samples, as opposed to in situ XRD analysis showing that the lower the calcination temperature the higher the copper dispersion. Spectroscopic measurements reveal that the phase transformation of zirconia from tetragonal to monoclinic takes place initially at the surface regions of the Cu-ZrO2 sample, as evidenced from the fact that the monoclinic phase can be detected first by Raman spectroscopies for the samples calcined at a lower temperature than by XRD. The highest activity was achieved for the 550 degrees C calcined material, illustrating that the creation of monoclinic phase enriched on the surface of tetragonal zirconia in Cu/ZrO2 are beneficial for the generation of copper catalyst with enhanced activities.

A Highly Efficient Cu/Zno/Al2o3 Catalyst Via Gel-Coprecipitation of Oxalate Precursors for Low-Temperature Steam Reforming of Methanol

Effect of preparation method on the hydrogen production from methanol steam reforming over binary Cu/ZrO2 catalysts

Hydrogen production via steam reforming of methanol using Cu/ZnO/Al 2 O 3 : Effect of catalyst synthesis method and Cu to Zn molar ratio on physico-chemical properties and catalytic performance

Production of hydrogen by steam reforming of methanol over Cu/ZnO catalysts prepared via a practical soft reactive grinding route based on dry oxalate-precursor synthesis

Hydrogen Production via Methanol Steam Reforming over CuO/ZnO/Al2O3 Catalysts Prepared via Oxalate-Precursor Synthesis

Methanol Steam Reforming for Hydrogen Production over CuZnZrOx: Promotion Effect of Cu

Structural Evolution and Catalytic Properties of Nanostructured Cu/Zro2 Catalysts Prepared by Oxalate Gel-Coprecipitation Technique

Highly effective methanol steam reforming Cu/ZnO catalyst prepared by a dry mechanochemical approach based on oxalate precursor synthesis

Hydrolysis Precipitation Method for the Preparation of Cu‐ZnO@Al2O3 Catalyst in Methanol Steam Reforming

Dissecting ZnO X /Cu interfacial self-encapsulation and methanol-induced strong metal-support interaction of the highly active alloyed CuZn and ZnO for methanol steam reforming

Performance of Cu/ZnO/Al2O3 Catalysts Prepared by Sol–Gel Methods on Methanol Steam Reforming

A High Activity Cu/ZnO/Al2O3 Catalyst for Methanol Synthesis: Preparation and Catalytic Properties

Hydrogen Production Via Steam Reforming of Methanol on Cu/ZnO/Al2O3 Catalysts: Effects of Al2O3 Precursors

A composite having a porous substrate and polyhedral Cu-Fe oxide nanoparticles showing high catalytic activity during the steam reforming of methanol at low temperatures

Fe–Ni–Ce–Zr-modified CuO–ZnO catalyst for methanol steam reforming

Methanol Steam Reforming over ZnO/ZnZrOx: Performance Enhanced with a Cooperative Effect

Achieving strong thermal stability in catalytic reforming of methanol over in-situ self-activated nano Cu2O/ZnO catalyst with dual-sites of Cu species

Highly Effective Hydrogen Production From Steam Reforming Of Methanol Over Sba-15-Modified Cu/Zno/Al2o3 Catalysts

Preparation of a Durable CuO/ZnO/CeO2/ZrO2 Catalyst on an SiC Support by an Inverse Microemulsion/Precipitation Method for Methanol Steam Reforming

High-performance Cu/ZnO/Al2O3 catalysts for methanol steam reforming with enhanced Cu-ZnO synergy effect via magnesium assisted strategy

High-Performance Cu/ZnO/Al 2 O 3 Catalysts for CO 2 Hydrogenation to Methanol