Abstract:A precursor CuO/ZnO/Al2O3 catalyst for methanol synthesis has been prepared at room temperature by introducing a ternary salt solution into the excess of sodium carbonate solution following the reverse co-precipitation method. The catalyst was tested for the synthesis of methanol from synthesis gas. The composition (vol. %) has been presented: CO, 22; CO2, 5.8; N2, 5.5; H2, balance. The methanol productivity was recorded to be 2.7 kg kgcat–1 h–1 at a temperature of 260 °С, a pressure of 3 MPa, and a space velocity of 61,700 l (kgcat)–1 h–1. The possibility of regenerating the activity of a catalyst subjected to conditions of artificial aging (overheating in a syngas environment) has been tested: approximately 92% of the initial activity could be restored. Physicochemical studies were conducted using the thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), the scanning electron microscopy (SEM), and the X-ray diffraction (XRD) techniques using the Cu, Zn, and Al oxides obtained following the co-precipitation method. X-ray studies revealed that an amorphous phase was obtained from the Al oxide that was synthesized following both the direct and reverse co-precipitation methods. The calcination temperature was 300 °C. Individual oxides of Cu and Zn obtained following the reverse co-precipitation method form crystalline phases when calcined at 300 °C. When all three ingredients are present, calcination of the sample at 300 °C helps obtain an X-ray amorphous structure of the catalyst characterized by a high specific surface area. High-temperature carbonates are formed from samples prepared using a ternary mixture of nitrate salts when these are calcined at 300 °C.

Hydrogen Production via Methanol Steam Reforming over CuO/ZnO/Al2O3 Catalysts Prepared via Oxalate-Precursor Synthesis

CO2 Hydrogenation to Methanol over Cu/ZnO Catalysts Synthesized Via a Facile Solid-Phase Grinding Process Using Oxalic Acid

Hydrogen Production Via Steam Reforming of Methanol on Cu/ZnO/Al2O3 Catalysts: Effects of Al2O3 Precursors

Hydrolysis Precipitation Method for the Preparation of Cu‐ZnO@Al2O3 Catalyst in Methanol Steam Reforming

Methanol Steam Reforming for Hydrogen Production over CuZnZrOx: Promotion Effect of Cu

Highly effective methanol steam reforming Cu/ZnO catalyst prepared by a dry mechanochemical approach based on oxalate precursor synthesis

Hydrogen Production by Steam Reforming of Ethanol over CuO-La_2O_3/ZrO_2 Catalyst

Dissecting ZnO X /Cu interfacial self-encapsulation and methanol-induced strong metal-support interaction of the highly active alloyed CuZn and ZnO for methanol steam reforming

A Highly Efficient Cu/Zno/Al2o3 Catalyst Via Gel-Coprecipitation of Oxalate Precursors for Low-Temperature Steam Reforming of Methanol

Hydrogen production via steam reforming of methanol using Cu/ZnO/Al 2 O 3 : Effect of catalyst synthesis method and Cu to Zn molar ratio on physico-chemical properties and catalytic performance

High-Performance Cu/ZnO/Al 2 O 3 Catalysts for CO 2 Hydrogenation to Methanol

A highly efficient Cu/ZnOx/ZrO2 catalyst for selective CO2 hydrogenation to methanol

Fe–Ni–Ce–Zr-modified CuO–ZnO catalyst for methanol steam reforming

Studies on CuO/La_2O_3-ZrO_2 Catalyst for Production of Hydrogen by Ethanol Steam Reforming

Microwave-irradiation promoted Cu/ZnO/Al2O3 catalyst for hydrogen production from steam reforming of methanol

Production of hydrogen by steam reforming of methanol over Cu/ZnO catalysts prepared via a practical soft reactive grinding route based on dry oxalate-precursor synthesis

Preparation of CuO/ZnO/Al2O3 Catalysts for Methanol Synthesis Using Parallel-Slurry-mixing Method

Effective Cu/ZnO/Al2O3 Catalyst for Methanol Production: Synthesis, Activation, Catalytic Performance, and Regeneration

Performance of Cu/ZnO/Al2O3 Catalysts Prepared by Sol–Gel Methods on Methanol Steam Reforming

ZnO-ZnFe2O4 Catalyst for Hydrogen Production from Methanol Steam Reforming

Modified Cu–ZnO Catalysts Supported on the Mixture of ZnO and Zn–Al Oxide for Methanol Production via Hydrogenation of CO and CO2 Gas Mixture