Abstract:To address climate change, the energy crisis, and global warming, hydrogen (H 2 ) can be used as a potential energy carrier because it is clean, non-toxic and efficient. Today, the mainstream industrial method of H 2 generation is steam reforming of methanol (SRM). In this process, a zinc-based commercial catalyst is usually used. In this work, a ZnO–ZnCr 2 O 4 catalyst was successfully synthesised by the glycine nitrate process (GNP) and developed for use in H 2 production by SRM. The specific surface area, porous structure and reaction sites of the zinc-based catalyst were effectively increased by the preparation method. The as-combusted ZnO–ZnCr 2 O 4 composite catalyst had a highly porous structure due to the gas released during the GNP reaction process. Moreover, according to the ZnO distribution and different G/N ratios, the specific surface area ( S BET ) of the as-combusted ZnO–ZnCr 2 O 4 catalyst varied from 29 m 2 g −1 to 46 m 2 g −1 . The ZnO–ZnCr 2 O 4 composite catalyst (G/N 1.7) exhibited the highest hydrogen production, 4814 ml STP min −1 g-cat −1 , at a reaction temperature of 450 °C without activation treatment. After activation, the ZnO–ZnCr 2 O 4 composite catalyst achieved hydrogen production of 6299 ml STP min −1 g-cat −1 at a reaction temperature of 500 °C. The hydrogen production performance of the ZnO–ZnCr 2 O 4 composite powder was improved by the uniform addition of ZnO to ZnCr 2 O 4 . Based on the performance, this ZnO–ZnCr 2 O 4 composite catalyst has great potential to have industrial and economic impact due to its high efficiency in hydrogen production.

ZnO-ZnFe2O4 Catalyst for Hydrogen Production from Methanol Steam Reforming

Sorption-Enhanced Steam Reforming of Glycerol for Hydrogen Production over a NiO/NiAl2O4 Catalyst and Li2ZrO3-Based Sorbent

ZnO–ZnCr2O4 composite prepared by a glycine nitrate process method and applied for hydrogen production by steam reforming of methanol

ZnCr X Fe 2-X O 4 (X = 0–2) porous powder prepared through self-combustion glycine nitrate process and applied to methyl alcohol steam reforming for production of pure hydrogen

Synergy Effect of MgO and ZnO in a Ni/Mg–Zn–Al Catalyst During Ethanol Steam Reforming for H2-rich Gas Production

Hydrogen Production via Methanol Steam Reforming over CuO/ZnO/Al2O3 Catalysts Prepared via Oxalate-Precursor Synthesis

Fe–Ni–Ce–Zr-modified CuO–ZnO catalyst for methanol steam reforming

Hydrogen Production Via Steam Reforming of Methanol on Cu/ZnO/Al2O3 Catalysts: Effects of Al2O3 Precursors

A High-Performance PdZn Alloy Catalyst Obtained from Metal-Organic Framework for Methanol Steam Reforming Hydrogen Production

Hydrogen Production from Steam Reforming of Methanol over Cuo/Zno/Al2o3 Catalysts: Catalytic Performance and Kinetic Modeling

Steam reforming of ethanol for hydrogen production over NiO/ZnO/ZrO2 catalysts

Catalytic Properties of Ag Promoted ZnO/Al2O3 Catalysts for Hydrogen Production by Steam Reforming of Ethanol

CuFeO2–CeO2 nanopowder catalyst prepared by self-combustion glycine nitrate process and applied for hydrogen production from methanol steam reforming

Hydrogen Production by Steam Reforming of Ethanol over CuO-La_2O_3/ZrO_2 Catalyst

Highly selective PdZn/ZnO catalysts for the methanol steam reforming reaction

High-Performance Cu/ZnO/Al 2 O 3 Catalysts for CO 2 Hydrogenation to Methanol

A highly efficient Cu/ZnOx/ZrO2 catalyst for selective CO2 hydrogenation to methanol

Efficiency NiCu/t-zirconia Catalysts for Methanol Steam Reforming: Experimental and DFT Insights

Design of technical ZnO/ZrO2 catalysts for CO2 hydrogenation to green methanol

Hydrogen production via steam reforming of methanol using Cu/ZnO/Al 2 O 3 : Effect of catalyst synthesis method and Cu to Zn molar ratio on physico-chemical properties and catalytic performance

Highly effective methanol steam reforming Cu/ZnO catalyst prepared by a dry mechanochemical approach based on oxalate precursor synthesis