Abstract:Graphical The new CuO–(Y2O3)0.4(CeO2)0.2 catalyst has high specific surface area and developed pore structure and exhibits excellent low CO selectivity and high H2 selectivity in methanol steam reforming (MSR) process, which is expected to provide a reference for large‐scale industrial hydrogen production. Compared with the relatively simple monometallic and bimetallic oxide catalytic systems, polymetallic catalysts have attracted much attention in recent years. CuO–(Y2O3)(1−x)/2(CeO2)x (x = 0, 0.2, 0.4, 0.6, 0.8, and 1) polymetallic catalyst for hydrogen production by methanol steam reforming(MSR) was prepared by sol–gel method and characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy, X‐ray photoelectron spectroscopy (XPS), and Specific surface area and pore size analyser(BET) techniques. XRD results show that the diffraction peaks of CuO–(Y2O3)0.4(CeO2)0.2 are sharp and intense, indicating that it is highly crystalline. SEM results show that the pore structure of catalyst becomes loose with the increase of Ce doping amount, and the catalyst particles become more uniform in size and more loose in shape. The BET results show that compared with other catalysts, CuO–(Y2O3)0.4(CeO2)0.2 catalyst has larger specific surface area, which improves the catalytic performance. XPS results showed that CuO–(Y2O3)0.4(CeO2)0.2 still had catalytic activity after reduction treatment. The results of MSR showed that the doping amount of cerium and the reaction conditions affected the catalytic performance of the catalyst. Ce doping promoted the synergistic effect of Cu and Y, and the hydrogen production of CuO–(Y2O3)0.4(CeO2)0.2 was the highest (about 6.74 × 10−3 mol/min/gcat). Ce doping leads to the change of CO/CO2 selectivity in gas products. The CO selectivity of CuO–(Y2O3)0.4(CeO2)0.2 catalyst is only 2% under the catalytic conditions of 400°C, W/M 4:1, and LHSV 20 h−1, which shows good catalytic activity.

Hydrogen Production by Oxidative Steam Reforming of Methanol over Ce1−xZnxOy Catalysts Prepared by Combustion Method

CO and Methane Oxidation Over CeXZr1-XO2 Mixed Oxide Supported PdO Catalysts

Effect of CeO 2 Morphology in Catalytic Performance via Methanol Oxidative Steam Reforming for Hydrogen Production

A Novel Ceo2/Zno Catalyst for Hydrogen Production from the Partial Oxidation of Methanol

The preparation of Ag/CeO_2-ZnO catalyst used for preparing hydrogen from methanol by partial oxidation

Hydrogen Production Via Steam Reforming of Methanol on Cu/ZnO/Al2O3 Catalysts: Effects of Al2O3 Precursors

Selective Production of Hydrogen from Partial Oxidation of Methanol over Supported Silver Catalysts Prepared by Method of Redox Coprecipitation

Highly efficient CO2 hydrogenation to methanol over Cu–Ce1-xZrxO2 catalysts prepared by an eco-friendly and facile solid-phase grinding method

Hydrogen Production from Steam Reforming of Ethanol Using Ni/CeO2 and Ni-Cu/CeO2 Catalysts

Hydrogen production through glycerol steam reforming over the NiCexAl catalysts

Hydrogen Production via Methanol Steam Reforming over CuO/ZnO/Al2O3 Catalysts Prepared via Oxalate-Precursor Synthesis

Methanol Synthesis from CO2 Hydrogenation over CuZnCeTi Mixed Oxide Catalysts

ZnO-ZnFe2O4 Catalyst for Hydrogen Production from Methanol Steam Reforming

Catalytic Steam Reforming of Bio-Oil-Derived Acetic Acid over CeO 2 -ZnO Supported Ni Nanoparticle Catalysts

Efficient methanol steam reforming over ZnCeZrOx: the unique role of cerium

Hydrogenation of Co2 to Methanol over Cucetiox Catalysts

Effect of oxygen vacancy influenced by CeO 2 morphology on the methanol catalytic reforming for hydrogen production

Improved hydrogen production performance from methanol steam reforming by Ce‐doped CuO–Y2O3 catalysts

A Ce-CuZn catalyst with abundant Cu/Zn-OV-Ce active sites for CO2 hydrogenation to methanol

Selective production of hydrogen by partial oxidation of methanol over Cu/Cr catalysts

Promotional Effect of CeO2 and Y2O3 on CuO/ZrO2 Catalysts for Methane Combustion