Abstract:Binary Cu/ZnO catalysts (with a Cu/Zn atomic ratio of 50/50) prepared via a novel dry synthetic approach based on solid-state oxalate-precursor synthesis were studied in regard to their performance in the steam reforming of methanol (SRM). The synthesis route involves facile solid-phase mechanochemical activation of a physical mixture of simple copper/zinc salts and oxalic acid, followed by calcination of the as-ground oxalate precursors at 350 °C. For comparison, their conventional analogues obtained by aqueous coprecipitation techniques were also examined. Structural characterization of the samples was performed by means of N2 adsorption, X-ray diffraction (XRD), diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), thermal gravimetric and differential thermal analysis (TG/DTA), scanning electron microscopy (SEM), temperature-programmed reduction (H2-TPR), N2O titration, and X-ray photoelectron spectroscopy (XPS). The results show that the grinding-derived Cu/ZnO catalysts exhibit superior SRM performance to their conventional counterparts obtained by wet-chemical methods. The enhanced performance of the grinding-derived catalysts can be attributed to a higher copper dispersion as well as the beneficial generation of highly strained Cu nanocrystals in the working catalyst. It is proposed that the present soft reactive grinding route based on dry oxalate-precursor synthesis can allow the generation of a new type of Cu/ZnO materials with favorable surface and structural properties, providing an attractive alternative for preparation of improved heterogeneous catalysts.

Highly effective methanol steam reforming Cu/ZnO catalyst prepared by a dry mechanochemical approach based on oxalate precursor synthesis

CO2 Hydrogenation to Methanol over Cu/ZnO Catalysts Synthesized Via a Facile Solid-Phase Grinding Process Using Oxalic Acid

Production of hydrogen by steam reforming of methanol over Cu/ZnO catalysts prepared via a practical soft reactive grinding route based on dry oxalate-precursor synthesis

Dissecting ZnO X /Cu interfacial self-encapsulation and methanol-induced strong metal-support interaction of the highly active alloyed CuZn and ZnO for methanol steam reforming

Hydrogen Production via Methanol Steam Reforming over CuO/ZnO/Al2O3 Catalysts Prepared via Oxalate-Precursor Synthesis

A Highly Efficient Cu/Zno/Al2o3 Catalyst Via Gel-Coprecipitation of Oxalate Precursors for Low-Temperature Steam Reforming of Methanol

Highly Effective Hydrogen Production From Steam Reforming Of Methanol Over Sba-15-Modified Cu/Zno/Al2o3 Catalysts

Methanol Steam Reforming for Hydrogen Production over CuZnZrOx: Promotion Effect of Cu

Fe–Ni–Ce–Zr-modified CuO–ZnO catalyst for methanol steam reforming

High-performance Cu/ZnO/Al2O3 catalysts for methanol steam reforming with enhanced Cu-ZnO synergy effect via magnesium assisted strategy

Hydrolysis Precipitation Method for the Preparation of Cu‐ZnO@Al2O3 Catalyst in Methanol Steam Reforming

Hydrogen Production Via Steam Reforming of Methanol on Cu/ZnO/Al2O3 Catalysts: Effects of Al2O3 Precursors

Highly effective hydrogen production from steam reforming of methanol over CNTs-promoted Cu/ZnO/Al2O3 catalysts

Effect of preparation method on the hydrogen production from methanol steam reforming over binary Cu/ZrO2 catalysts

Enhanced Methanol Synthesis from CO 2 Hydrogenation Achieved by Tuning the Cu-ZnO Interaction in ZnO/Cu 2 O Nanocube Catalysts Supported on ZrO 2 and SiO 2

Induced activation of the commercial Cu/ZnO/Al2O3 catalyst for the steam reforming of methanol

A practical approach for the preparation of high activity Cu/ZnO/ZrO2 catalyst for methanol synthesis from CO2 hydrogenation

Hydrogen production via steam reforming of methanol using Cu/ZnO/Al 2 O 3 : Effect of catalyst synthesis method and Cu to Zn molar ratio on physico-chemical properties and catalytic performance

Microwave-irradiation promoted Cu/ZnO/Al2O3 catalyst for hydrogen production from steam reforming of methanol

An exsolved Cu nanocatalyst for highly efficient methanol steam reforming

Modulation of Al2O3 and ZrO2 composite in Cu/ZnO-based catalysts with enhanced performance for CO2 hydrogenation to methanol