Abstract:Dimethyl ether (DME) is regarded as an environmentally benign fuel for vehicles. Two kinds of reactor technologies for DME synthesis have been proposed by previous researchers: the fixed-bed and the slurry reactor. As the reactions are highly exothermic and the temperature window of the catalyst is very narrow, the fixed-bed reactor provides a limited heat removal capability and a low conversion of the syngas. The slurry reactor can provide an effective temperature control but a very high inter-phase mass transfer resistance is added by the liquid medium. The Fluidized bed reactor can be an ideal reactor for DME synthesis as it possesses both high heat and mass transfer efficiencies. In this paper, a two-phase model is used to theoretically analyze the DME synthesis in a fluidized bed reactor, with both phases assumed to be in plug flow and taking into account the changes in bubble diameter resulting from the reaction. Three reactions take place simultaneously when DME is manufactured from the syngas (H2 + CO): a) CO+2H2 = CH3OH; b) 2CH3OH = DME+H2O; and c) CO+H2O = CO2+H2. The simulation shows that, at the reactor outlet, the equilibrium approaches of the three reactions are 0.32, 0.1, and 0.61, respectively. When H2/CO=1.0, the CO conversion and DME selectivity in a fluidized bed reactor are 62% and 95%, while those in a fixed-bed reactor are 9% and 86%. In a slurry reactor, the CO conversion and DME selectivity are 17% and 70%, respectively. Therefore, the fluidized-bed is the most promising candidate reactor for conducting the DME synthesis from syngas. Effects of the operating conditions on the performance of DME synthesis in the fluidized-bed reactor are discussed in details. The optimal H2/CO ratio is between 1.0-1.5, and increasing the pressure is shown to improve the reactor performance.

Synthesis of dimethyl ether from greenhouse gas CO_2

Liquid-phase CO2 Hydrogenation to Methanol Synthesis: Solvent Screening, Process Design and Techno-Economic Evaluation

Dimethyl Ether Synthesis from CO2 Hydrogenation on a CuO−ZnO−Al2O3−ZrO2/HZSM-5 Bifunctional Catalyst

Thermodynamic Analysis for Direct Synthesis of Dimethyl Ether from CO And/or CO_2 Hydrogenation

One-step Synthesis of Dimethyl Ether from CO2+H2 in a Three-phase Reactor

Studies on synthesis of dimethyl carbonate from methanol and carbon dioxide

Experimental study of improved two step synthesis for DME production

Direct catalytic production of dimethyl ether from CO and CO2: A review

Thermodynamics of the Single-Step Synthesis of Dimethyl Ether from Syngas

Does Direct Dimethyl Ether Synthesis from Carbon Dioxide and Hydrogen Yield More Valuable Products than the Equivalent Methanol Production? A Review on Recent Work

One-step Synthesis of Dimethyl Ether from Semi-water Gas for Industrial Trial Production

Catalytic materials for direct synthesis of dimethyl carbonate (DMC) from CO2

Pilot Scale Study on Direct Synthesis of Dimethyl-Ether from Biomass Synthesis Gas

Theoretical Analysis of Fluidized-Bed Reactor for Dimethyl Ether Synthesis from Syngas

Scale study of direct synthesis of dimethyl ether from biomass synthesis gas.

DIRECT SYNTHESIS OF DIMETHYL ETHER FROM SYNGAS IN THREE-PAHASE AGITATED REACTORS

Synthesis of ethanol via a reaction of dimethyl ether with CO2 and H2

Study on Synergy Effect in Dimethyl Ether Synthesis from Syngas

Synthetic fuels and chemicals production from biomass synthesis gas

Dimethyl ether synthesis from syngas over bifunctional hybrid catalyst and the intrinsic kinetics

RESEARCH OF BIOGAS SYNTHESIZING DIMETHYL ETHER