Abstract:Composite ceramics of 0.7BaO center dot 0.3SrO center dot(I-gamma)TiO2 center dot gamma Nb2O5 (BSTN) with coexistence of barium strontium titanate, Ba1-xSrxTiO3 (BST), and strontium barium mobate, SrxBa1-xNb2O6 (SBN) phases were successfully prepared in situ by controlling excess components according to a specially designed formula of 0.7BaO center dot 0.3SrO center dot(1-gamma)TiO2 center dot gamma Nb2O5 and by using a traditional ceramic process. X-ray diffractometry (XRD), scanning electron microscopy (SEM) and energy dispersion spectrometer (EDS) were used to characterize the phase composition, morphology and the micro-area chemical composition of the composite ceramics. The results showed that the SBN tungsten bronze phase appeared and coexisted stably with the BST perovskite phase when the excess content of Nb2O5 was > 6mol%, whereas the BST perovsklite phase formed and coexisted stably with the SBN tungsten bronze phase when the excess content of TiO2 was > 5.3mol%. In the ease of the two phases being equivalent to each other in BSTN composite ceramics, Nb2O5 was hard to be resolved into the perovskite phase, however, a few of TiO2 was easy to be resolved in the tungsten bronze phase. The microstructure of the composite ceramics were consisted of two kinds of grains. The smaller polygonal grains were belonged to the BST phase, and the larger ones to the SBN phase. The coexistence of the two phases inhibited the growth of the BST crystal. The density of microstructure of the composite ceramic was higher than that of both the pure BST and SBN calcined at the same temperature for the same time.

Reaction Synthesis of Ceramic Composites Containing In Situ Formed Boron Nitride as Dispersed Phase

Reaction synthesis of high performance boron nitride-containing composites (BNCC)

In Situ Combustion Synthesis of TiB<sub>2</sub>-AIN Composites

Reactive synthesis of alumina-boron nitride composites

In Situ Reaction Synthesis of Silicon Carbide–Boron Nitride Composite from Silicon Nitride–Boron Oxide–Carbon

Structural Formation and Mechanism in Combustion Synthesis of Nitrogen Ceramics (AIN, Si<sub>3</sub>N<sub>4</sub> and AIN-SiC)

Thermogravimetry, Differential Thermal Analysis, And Mass Spectrometry Study Of The Silicon Nitride-Boron Carbide-Carbon Reaction System For The Synthesis Of Silicon Carbide-Boron Nitride Composites

Nonoxide–boron Nitride Composites: in Situ Synthesis, Microstructure and Properties

Reaction Synthesis of Aluminum Nitride-Boron Nitride Composites Based on the Nitridation of Aluminum Boride

Reaction-Bonded Boron Nitride-Aluminum Nitride Ceramic Composites

Fabrication of Silicon Nitride/ Boron Nitride Nanocomposite Powder

Reaction Synthesis of SiC-AlN Ceramic Alloys

In-Situ Reactive Synthesis of AlN-SiC Composites and Solid Solutions

SiC-BN Ceramic Matrix Composites by In-situ Reaction

Sialon-Boron Nitride Porous Composites: in Situ Synthesis, Microstructure and Properties

In situ Preparation of BST(Nb)/SBN(Ti) Composites

Silicon nitride/boron nitride ceramic composites fabricated by reactive pressureless sintering

Preparation of Sic/Bn Nanocomposite Powders by Chemical Processing

Design and Thermodynamics of in -Situ Formed SiC -BN Ceramic Matrix Composites

Synthesis of SiC-AlN Ceramic Alloy Powder by the Direct Reactions Between the Constituent Elements.

Preparation and characteristics of highly porous BN-Si3N4 composite ceramics by combustion synthesis