Abstract:This study investigates AA5083 boron nitride (BN) nanocomposites with varying BN content, produced via powder metallurgy. Emphasizing the impact of BN on microstructure and mechanical properties, the research highlights enhanced compressive strength and homogenous dispersion. Detailed analyses using X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, and electron backscatter diffraction offer insights into the materials' potential for aerospace, automotive, and marine applications. The as‐received aluminum alloy (AA5083) powders (44 μm) and hexagonal boron nitride (BN) nanoparticles (65–75 nm) are used to fabricate AA5083‐BN nanocomposites with varying BN content (0, 3, 6, 9, and 12 wt%). A powder metallurgy solid‐state method is employed, involving ball milling for 20 h at 100 rpm with a ball‐to‐powder mass ratio of 10:1. The processed powders are then consolidated through forging–sintering at 550 °C for 30 min, followed by hot forging at 225 MPa. The microstructure is examined using X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray, transmission electron microscopy, and electron backscatter diffraction to understand the effect of processing variables. The compaction behavior is investigated both experimentally and empirically, revealing a relative green density exceeding 88% at 500 MPa. The empirical models display coefficients of determination (R2 values) exceeding 99% for predicting the compaction behavior. Compression tests on bulk samples show that BN reinforcement significantly enhances ultimate compressive strength, with values reaching 473.256 ± 5.54, 536.374 ± 2.87, 567.694 ± 4.22, and 601.911 ± 6.54 MPa for TRB‐3, TRB‐6, TRB‐9, and TRB‐12, respectively. The developed composites achieve relative densities greater than 97%, indicating promising applications in the aerospace, automotive, and marine industries.

Reaction Synthesis of Aluminum Nitride-Boron Nitride Composites Based on the Nitridation of Aluminum Boride

Reactive synthesis of alumina-boron nitride composites

High pressure sintering behavior and mechanical properties of cBN-Ti 3Al and cBN-Ti 3Al-Al composite materials

Reaction synthesis of high performance boron nitride-containing composites (BNCC)

In Situ Combustion Synthesis of TiB<sub>2</sub>-AIN Composites

Reaction Synthesis of Ceramic Composites Containing In Situ Formed Boron Nitride as Dispersed Phase

Reaction-Bonded Boron Nitride-Aluminum Nitride Ceramic Composites

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

Nonoxide–boron Nitride Composites: in Situ Synthesis, Microstructure and Properties

Boron Nitride?Aluminum Nitride Ceramic Composites Fabricated by Transient Plastic Phase Processing

In-situ formation of AlN/Al composite

Fabrication of machinable AlN–BN composites with high thermal conductivity by pressureless sintering turbostatic BN-coated AlN nanocomposite powders

Preparation and Properties of Cubic BN Sintered Compact with AlN.

High-pressure synthesis of Al<sub>2</sub>O<sub>3</sub>-cBN composites: Effect of thermodynamic condition and cBN volume fraction on their microstructure and properties

Synthesis of h‐BN composite powders via aluminothermic reduction combustion route

Synthesis, Microstructural Investigation, and Mechanical Behavior of AA5083/Boron Nitride Nanocomposite

Composite Nitride Nanoceramics in the System Titanium Nitride (TiN)-Aluminum Nitride (AlN) through High Pressure and High Temperature Sintering of Synthesis-Mixed Nanocrystalline Powders

Synthesis and characterization of cubic boron nitride (Al)-Al2O3 composites under high pressure and high temperature conditions

In Situ Fabrication and Mechanical Properties of Al–AlN Composite by Hot Extrusion of Partially Nitrided AA6061 Powder

Surface Hardening of BN-Al Ceramic Composites

Effect of aln content on the microstructure and mechanical properties of bn-based composites