Abstract:Aiming at the problems of the large storage, complex composition, low comprehensive utilization rate, and high environmental impact of coal gangue, this paper carried out experimental research on the preparation of iron oxide red from high-iron gangue by calcination activation, acid leaching, extraction, and the hydrothermal synthesis of coal gangue. The experimental results show that when the calcination temperature of coal gangue is 500 °C, the calcination time is 1.5 h, the optimal concentration of iron removal is 6 mol/L, the acid leaching temperature is 80 °C, the acid leaching time is 1 h, and the liquid--solid mass ratio is 4:1; the iron dissolution rate can reach 87.64%. A solvent extraction method (TBP-SK-hydrochloric acid system) was used to extract the leachate, and a solution with iron content up to 99.21% was obtained. By controlling the optimum hydrothermal conditions (pH = 9, temperature 170 °C, reaction time 5 h), high-purity iron oxide red product can be prepared; the yield is 80.07%. The red iron oxide was characterized by XRD, SEM-EDS, particle-size analysis, and ICP-OES. The results show that the red iron oxide peak has a cubic microstructure, an average particle size of 167.16 μm, and a purity of 99.16%. The quality of the prepared iron oxide red product meets the requirement of 98.5% of the "YHT4 Iron oxide Standard for ferrite". It can be used as a raw material to produce high-performance soft magnetic ferrite. In summary, this experimental study on the preparation of iron oxide red from coal gangue is of great significance for the comprehensive utilization of coal gangue to realize the sustainable development of the environment and economy.

Study on process of iron oxide red with less pollution

Study on electroplating waste water treatment process

The Investigation of the Treatment of Dyeing Wastewater by Galvanic Corrosion-Reduction Degradation-Coagulation Absorption

In Situ Generation of Hydrogen Peroxide Using Polymetallic-Doped G-C3n4 for Pollutant Removal

A New Process of Solveing Corrosion Problem of Refined Liquefied Gas

Preparation of nano-sized iron oxide from steel pickling liquors

The Recycling of Ferric Salt in Steel Pickling Liquors: Preparation of Nano-sized Iron Oxide

Colour Change of Red Iron Oxide by One-step Method Using Oxidant

Study on Inorganic Oxidants Assisted Sonocatalytic Degradation of Acid Red B in Presence of Nano-Sized ZnO Powder

Experimental Study on the Preparation of High-Purity Iron Oxide Red by Acid Leaching Iron from Coal Gangue

Synthesis of Ce–Ni/sepiolite with Excellent Adsorption and Catalytic Oxidation Performance Toward Dyes

STUDY ON THE RECOVERY OF HIGH PURITY IRON OXIDE FROM PICKLING WASTE LIQUOR OF STEEL SHEET

Preparation of Iron Oxide Red with High Titanium Slag Recovery Dust

Studies on the New Treatment Method of Steel Pickling Liquid Waste

Enhancing iron redox cycling for promoting heterogeneous Fenton performance: A review

The Preparation of High-Purity Iron (99.987%) Employing a Process of Direct Reduction–Melting Separation–Slag Refining

An improved Wellman-Lord process for simultaneously recovering SO2 and removing NOX from non-ferrous metal smelting flue gas

Producing Red Iron Oxide from Mud Iron by SCWO

Experiments on effect of red mud-based slag on distribution of sulfur in liquid iron

Study on treatment of wastewater containing complex copper by iron powder assisted Fenton

New Sustainable, Scalable and One-Step Synthesis of Iron Oxide Nanoparticles by Ion Exchange Process