Abstract:To improve the recycling efficiency of rejected electrolytic manganese metal (EMM) scrap that contains excessive sulfur, a high-temperature experiment and mathematical model reflecting the mechanism of sulfur transfer from the molten manganese metal to the molten slag were elaborated. A MoSi 2 electrical resistance furnace filled with argon protective gas was first employed to perform the desulfurization experiment at 1673 K (1400 °C). Four different fluorine slags with the CaO content ranging from 0 to 20 pct were used in the experiment. A mathematical model of the rejected EMM scrap desulfurization, based on the two-film theory, was established. It adequately described the thermodynamics and kinetics of the rejected EMM scrap desulfurization reaction. In particular, it captured the influence of the interfacial tension between the molten slag and molten manganese for the sulfur transfer process. A comparative analysis of measured and calculated results proved the model feasibility: it took into account the effects of the holding temperature, slag CaO content, the initial sulfur content in rejected EMM scrap, and slag/manganese mass ratio on the desulfurization efficiency. The results indicate that CaO could promote the desulfurization of the manganese metal. The sulfur removal ratio is 58.01 pct with a CaO-free slag at 1673 K (1400 °C), while the ratio increases to 84.58 pct if the CaO content rises to 20 pct. At higher temperatures, the CaO content in the slag can be appropriately reduced. High slag/manganese mass ratios were found to benefit the sulfur removal, while the CaO content in the slag could be adjusted according to the initial sulfur content in the rejected EMM scrap.

Experiments on effect of red mud-based slag on distribution of sulfur in liquid iron

Properties of Fluorine-Free Steelmaking Flux Prepared Using Red Mud

Investigation of the smelting reduction mechanism and of iron extraction from high-iron red mud

A Novel Method of Extracting Iron from High-Iron Red Mud and Preparing Low-Carbon Cement Clinker from Tailings

Reductive roasting of red mud with carbon and sulfuric acid dissolution of iron and aluminum: Transformation phases and leaching characteristics

Experimental Research on Vortex Melting Reduction of High-Iron Red Mud (Bauxite Residue)

Desulphurization of Hot Metal and Ferronickel with Calcium Aluminate Fluxes

Iron Recovery from Bauxite Tailings Red Mud by Thermal Reduction with Blast Furnace Sludge

Novel method for comprehensive utilization of MSWI fly ash through co-reduction with red mud to prepare crude alloy and cleaned slag

An efficient and clean utilization technique for red mud based on fluidized bed carbon monoxide reduction

Experiment Research on Flue Gas Desulfurization Using Steelmaking Slu Dge in Converter

Iron Extraction from Red Mud using Roasting with Sodium Salt

Recycling of steel slag as a flux for submerged arc welding and its effects on chemistry and performance of welds

A Clean Disposal Method of Carbide Slag with Carbon Emission Reduction: Used As a Flux for Iron Ore Sintering

Research on red mud-limestone modified desulfurization mechanism and engineering application

Study on Separation of Iron from Waste Slag of Pyrite Processing

Investigation on Desulfurization of Rejected Electrolytic Manganese Metal Scrap: Experiment and Mathematical Modeling

A novel approach for the resource utilization of zinc-bearing dust and sludge via the blast furnace main trough

Research on the Advantages of Vortex Smelting Reduction of High-Iron Red Mud (Bauxite Residue)

Investigation on Applicability of Lime as Desulfurization Agent for Molten Cast Iron

Directional sulfur removal from ladle furnace slag by electric field strengthening treatment