Abstract:Red mud, which could cause numerous problems to the environment, is a hazardous waste generated from the alumina smelting industry. In general, the storage and harmless utilization of red mud are hard to implement due to its fine particle size and high alkalinity. This study put forward a novel process to separate iron (MgFe2O4) and alumina (Al2O3) in red mud by a magnetization sintering method. The magnesium oxide was added to transform the nonmagnetic Fe2O3 into magnetic MgFe2O4 to achieve physical separation of iron-bearing minerals, and the alumina-bearing minerals were converted into dissoluble NaAlO2 minerals in a one-step reaction. The atmospheric pressure leaching process was adopted in this study for alumina resource recovery. To achieve clean alumina production, the silicate in the leaching solution was removed by adding the slightly soluble CaSO4, and the entire process becomes clean and harmless. The feasibility of the process was verified by thermodynamic analysis, and a series of experiments were performed to detect the optimum MgO/(Fe2O3 + MgO) ratio and the calcining and leaching conditions. The morphological and mineralogical characteristics of modified red mud, leaching red mud, and magnetic separation product were studied by X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) energy dispersive spectroscopy (EDS). It was observed that under the optimal conditions with MgO/(Fe2O3 + MgO) of 14.89% to recover iron and aluminum, the corresponding recovery rates were 67.54% and 73.01% respectively, and the iron grade was 30.46%. The EDS results showed that the obtained Mg/Fe ratio of the magnetic separation product was 0.4677–0.528, which is slightly different from that of the standard MgFe2O4 at 0.5. This new method can promote the development of comprehensive utilization of red mud and iron production.

Producing Red Iron Oxide from Mud Iron by SCWO

Iron Extraction from Red Mud using Roasting with Sodium Salt

Reductive roasting of red mud with carbon and sulfuric acid dissolution of iron and aluminum: Transformation phases and leaching characteristics

Investigation of the smelting reduction mechanism and of iron extraction from high-iron red mud

Study on Magnetization Roasting Kinetics of High-Iron and Low-Silicon Red Mud

Experiments on effect of red mud-based slag on distribution of sulfur in liquid iron

An efficient and clean utilization technique for red mud based on fluidized bed carbon monoxide reduction

A Novel Method of Extracting Iron from High-Iron Red Mud and Preparing Low-Carbon Cement Clinker from Tailings

The impact of calcination atmosphere on Cr(VI) conversion in correction raw materials for high iron red mud

Clean utilization of high-iron red mud by suspension magnetization roasting

Experimental Study on the Preparation of High-Purity Iron Oxide Red by Acid Leaching Iron from Coal Gangue

Extraction of Iron and Alumina from Red Mud with a Non-Harmful Magnetization Sintering Process

Stepwise extraction of valuable components from red mud based on reductive roasting with sodium salts

Extraction of Scandium and Iron from Red Mud

Selective extraction of scandium from bauxite residue (red mud) utilizing iron sulfate roasting followed by water leaching

Supercritical water oxidation of tannery sludge: stabilization of chromium and destruction of organics.

A new disposal method for white mud: Replacing limestone in iron ore sintering

Co-pyrolysis of biomass with Red Mud: An efficient approach to improving bio-oil quality and resourceful utilization of the iron in Red Mud

Red mud with enhanced dealkalization performance by supercritical water technology for efficient SO 2 capture

Iron Recovery from Bauxite Tailings Red Mud by Thermal Reduction with Blast Furnace Sludge

Synergistic desulfurization performance of industrial waste red Mud: A comprehensive experimental and computational study for COS removal and CO(g) production