Abstract:The efficient, safe and eco-friendly disposal of the chromium-containing sludge (CCS) has attracted an increasing concern. In this study, Co-processing of CCS was developed via employing sintering and ironmaking combined technology for its harmless disposal and resource utilization. Crystalline phase and valence state transformation of chromium (Cr), technical feasibility assessment, leaching risk, characteristics of sintered products, and pollutant release during CCS co-processing were investigated through a series of laboratory-scale sintering pot experiments and large scale industrial trials. The results showed that the content of Cr(VI) in sintered products first increased then decreased with increasing temperature ranges of 300 °C–800 °C, and reached a maximum of 2189.64 mg/kg at 500 °C. 99.99% of Cr(VI) can be reduced to Cr(III) at above 1000 °C, which was attributed to the transformation of the Cr(VI)-containing crystalline phases (such as, MgCrO 4 and CaCrO 4 ) to the (Mg, Fe 2+ )(Cr, Al, Fe 3+ ) 2 O 4 . The industrial trial results showed that adding 0.5 wt‰ CCS to sintering feed did not have adverse effects on the properties of the sintered ore and the plant's operating stability. The tumbler index of sinter was above 78% and the leaching concentrations of TCr (0.069 mg/L) was significantly lower than the Chinese National Standard of 1.0 mg/L (GB5085.3–2007). The TCr contents of sintering dust and blast furnace gas (BFG) scrubbing water were less than 0.19 wt‰ and 0.11 mg/L, respectively, which was far below the regulatory limit (1.5 mg/L, GB13456-2012). The mass balance evaluation results indicated that at least 89.9% of the Cr in the CCS migrated into the molten iron in the blast furnace (BF), which became a useful supplement to the molten iron. This study provided a new perspective strategy for the safe disposal and resource utilization of CCS in iron and steel industry.

A new disposal method for white mud: Replacing limestone in iron ore sintering

Utilization of Cow Bone Waste and Calcium Oxide for the Solidification and Stabilization of MSWI Fly Ash: Towards Sustainable Practices

A Clean Disposal Method of Carbide Slag with Carbon Emission Reduction: Used As a Flux for Iron Ore Sintering

Disposal of zinc extraction residues via iron ore sintering process: an innovative resource utilization

Reutilizing Waste Iron Tailing Powders as Filler in Mortar to Realize Cement Reduction and Strength Enhancement

The harmless and value-added utilization of red mud: Recovering iron from red mud by pyrometallurgy and preparing cementitious materials with its tailings

Experimental Study on the Resource Utilization of Carbide Slag in Iron Ore Sintering Process

Utilization of Mechanochemically Pretreated Municipal Solid Waste Incineration Fly Ash for Supplementary Cementitious Material

Effect of Granulating Characteristics on Harmless Disposal of Waste Selective Catalytic Reduction Catalyst in Iron Ore Sintering Process

Harmless Treatment of Waste Selective Catalytic Reduction Catalysts During Iron Ore Sintering Process

A Novel Method for MSWI Fly Ash Resource Based on Calcium Component Regulation and CO2 Mineralization

A novel method for MSWI fly ash resource based on calcium component regulation and CO 2 mineralization

Bidirectional Catalysis Disintegration and Mineral Polymerization via Endogenous Iron(III) from Iron-Rich Sludge in Synergy with Waste Incineration Fly Ash

Water-Washing of Iron-Ore Sintering Gas Cleaning Residue for Beneficial Reutilization As Secondary Construction Material

Industrial Waste and Biomass Charcoal Composite Fuel for Iron Ore Sintering: Harmless Disposal of Waste and Carbon Reduction

Dioxins control as co-processing water-washed municipal solid waste incineration fly ash in iron ore sintering process

Modulating red mud for the fabrication of cementitious material by analyzing the thermal evolution of hydrogarnets

Sintering process of Fenton sludge-derived water treatment filler

A Novel Method of Extracting Iron from High-Iron Red Mud and Preparing Low-Carbon Cement Clinker from Tailings

Reuse of Water Purification Sludge As Raw Material in Cement Production

Treatment of chromium-containing sludge using sintering and ironmaking combined technology: A risk-reducing strategy for environmental impact