Abstract:Red mud, which could cause numerous problems to the environment, is a hazardous waste generated from the alumina smelting industry. In general, the storage and harmless utilization of red mud are hard to implement due to its fine particle size and high alkalinity. This study put forward a novel process to separate iron (MgFe2O4) and alumina (Al2O3) in red mud by a magnetization sintering method. The magnesium oxide was added to transform the nonmagnetic Fe2O3 into magnetic MgFe2O4 to achieve physical separation of iron-bearing minerals, and the alumina-bearing minerals were converted into dissoluble NaAlO2 minerals in a one-step reaction. The atmospheric pressure leaching process was adopted in this study for alumina resource recovery. To achieve clean alumina production, the silicate in the leaching solution was removed by adding the slightly soluble CaSO4, and the entire process becomes clean and harmless. The feasibility of the process was verified by thermodynamic analysis, and a series of experiments were performed to detect the optimum MgO/(Fe2O3 + MgO) ratio and the calcining and leaching conditions. The morphological and mineralogical characteristics of modified red mud, leaching red mud, and magnetic separation product were studied by X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) energy dispersive spectroscopy (EDS). It was observed that under the optimal conditions with MgO/(Fe2O3 + MgO) of 14.89% to recover iron and aluminum, the corresponding recovery rates were 67.54% and 73.01% respectively, and the iron grade was 30.46%. The EDS results showed that the obtained Mg/Fe ratio of the magnetic separation product was 0.4677–0.528, which is slightly different from that of the standard MgFe2O4 at 0.5. This new method can promote the development of comprehensive utilization of red mud and iron production.

Extraction of Scandium and Iron from Red Mud

Efficient Selective Extraction of Scandium from Red Mud

Separation and Recovery of Iron and Scandium from Acid Leaching Solution of Red Mud Using D201 Resin

High-Selective Extraction of Scandium (Sc) from Bauxite Residue (Red Mud) by Acid Leaching with MgSO4

Selective extraction of scandium from bauxite residue (red mud) utilizing iron sulfate roasting followed by water leaching

Research on High-Pressure Hydrochloric Acid Leaching of Scandium, Aluminum and Other Valuable Components from the Non-Magnetic Tailings Obtained from Red Mud after Iron Removal

Solvent Extraction of Scandium from Leaching Solution of Red Mud Roasted with Ammonium Sulfate Using D2EHPA/TBP

Recovery of Scandium from Bauxite Residue—red Mud: a Review

Extraction of scandium from scandium-rich material derived from bauxite ore residues

Separation and Recovery of Scandium and Titanium from Red Mud Leaching Liquor Through a Neutralization Precipitation-Acid Leaching Approach

Enhanced extraction of scandium and inhibiting of iron from acid leaching solution of red mud by D2EHPA and sodium chloride

Enhanced Selective Leaching of Scandium from Red Mud

Iron Extraction from Red Mud using Roasting with Sodium Salt

Recovery of Scandium from Bauxite Residue by Selective Sulfation Roasting with Concentrated Sulfuric Acid and Leaching

Recovery of Iron and Rare Earth Elements from Red Mud Through an Acid Leaching-Stepwise Extraction Approach

Extraction of Iron and Alumina from Red Mud with a Non-Harmful Magnetization Sintering Process

Recovery of scandium from red mud by leaching with titanium white waste acid and solvent extraction with P204

A novel process for recovery of aluminum, iron, vanadium, scandium, titanium and silicon from red mud

Selective recovery of vanadium and scandium by ion exchange with D201 and solvent extraction using P507 from hydrochloric acid leaching solution of red mud

New insights on scandium separation from scandium concentrate with titanium dioxide wastewater

Efficient Extraction and Separation of Scandium from Scandium-Bearing Solid Waste and Acid by Synergistically Leaching Followed by Solvent Extraction