Abstract:The rotor unbalance is a major source of rotor vibrations. Rotor vibrations often produce many undesired effects like noise, wear and fatigue, etc. In this paper, we try to seek the benchmark solutions for the unbalance responses of complex rotor-bearing system. The presented approach could be seen as the extension of transfer matrix method (TMM) in some sense. For the TMM, a disk or supporting structure cut off one uniform shaft element into two and someone must use the compatibility condition between these two new elements to derive the transitive matrix. However, for the presented approach, it directly solves the governing equations of uniform shaft elements with consideration of the effects of disks and supporting structures. Thus, this analytical approach is advantageous in reducing the times of matrix multiplication between state matrices and field matrices. One only needs to calculate the inversion of 16 × 16 dynamic stiffness matrix to find the steady state response. It saves the computer memory and is easy to be programmed. In addition, this analytical approach avoids the problems of selecting optimal discretization mesh densities in the case of FEM applications. For arbitrary linear boundary condition, the benchmark solutions are always easy to be obtained. The numerical simulation is carried out and two numerical examples are given to validate the new solutions. In which the finite element method is used as the numerical approach. Simulation results show that the benchmark solutions match very well with the FEM results. The effects of anisotropy in the supporting structures on the rotor's dynamic behavior, which are observed in this work, are also in accordance with many references. This validates the benchmark solutions further.

The Effect on Dish Centrifuge'dynamical Characteristic of the Unbalance Weight of Rotor

Principal Axis System's Critical Rotating Speed Calculation and Analysis of Dish Centrifuge

Rigid Rotor Dynamic Balancing with the Influence Coefficient Method

Analysis on Dynamic Characteristics and Design of Centrifuge

Rigid Rotor Dynamic Balancing by Two-Plane Correction with the Influence Coefficient Method

The Design of Dynamic Balancing Machine Based on Finite Element Analysis

Dynamic Characteristics of Scraper-Discharge Material Centrifuge

Extraction Of Unbalance Signals From Miniature-Rotor Dynamic Balancing Machine

Dynamic Balancing of a Centrifuge: Application to a Dual-Rotor System with Very Little Speed Difference

Synchronization Identification Method for Unbalance of Dual-Rotor System

On-line Unbalance Identification of Flexible Rotor System

Analysis of Imbalance Calculation Method in Dynamic Balancing Machinery

Experimental Investigation into the Effect of Fluid Viscosity on Instability of an Over-Hung Flexible Rotor Partially Filled with Fluid

Non-whole beat correlation method for the identification of an unbalance response of a dual-rotor system with a slight rotating speed difference

Research on the Field Dynamic Balancing Technology and Instrument for a High Speed Cantilever Rotor

Analyse Rotor Dynamics of Agitating Shaft with the Finite Element Method

Dynamic Balance of Unsymmetrical Rotor-Bearing System

Innovative design and experimental validation of dynamic balance in rotary compressors based on particle damping energy dissipation technology

A new multi-disk shaft balancing method for rotating machinery using strain gauges

Benchmark solutions for the dynamic analysis of general rotor-bearing system with arbitrary linear boundary conditions

Model verification and vibration analysis of the four-disk hollow flexible shaft rotor system