Abstract:This paper strives to derive the analytical solutions for the dynamic analysis of stepped multi-span rotor system, where the rotating shaft's internal damping effect is also considered. Specifically, the steady-state whirl analysis and free vibration analysis is given herein. For the steady-state whirl analysis, firstly, the stepped shaft is spilt to several uniform segments and their governing equations are established by Hamilton principle. Subsequently, by applying variable separation method and Laplace transform method to each segment's governing equation, their steady-state responses in terms of determinate interpolation functions multiplied by unknown boundary constants are derived. Then based on the transfer matrix method, each segment's boundary constants are determined with consideration of the compatibility conditions of each two adjacent segments and the end boundary conditions. For the free vibration analysis, one only need to remove the forced term in the steady-state form of transfer matrix and the rotor's characteristic equation will be obtained. Through the theoretical derivation, it is found that this analytical approach can be generalized to any isotropic elastic boundary conditions. To validate the proposed method, two case studies are proposed, where the finite element method is used as benchmark method. For the first one, the influence of internal damping on a uniform rotor's damped whirl characteristics and its stability is analyzed. The damped whirl characteristics analysis reveals that viscous internal damping result in the destabilization of forward modes as long as the spinning speed becomes higher than the critical speed. This phenomenon is also demonstrated by the time responses analysis. For the second one, the dynamic responses of a two-span three steps rotor-bearing system with isotropic viscoelastic boundary conditions are determined. All of simulated results show a great agreement between analytical results and FEM results.

Analyse Rotor Dynamics of Agitating Shaft with the Finite Element Method

Principal Axis System's Critical Rotating Speed Calculation and Analysis of Dish Centrifuge

Simulation Methodology Development for Rotating Blade Containment Analysis

Vibration Analysis of a Nonlinear Rotor-Bearing-seal System

Analysis on Modeling Rotor System with Sidling Bearing and Ring Seal by Using FEM

A Rotor Dynamics' Finite Element Model with Consideration of the Influential Effect of the Fluid

Investigation of the Dynamic Characteristics of a Dual Rotor System and Its Start-Up Simulation Based on Finite Element Method

Mechanical property analysis of shaft tubular pump rotor with different blade angle based on fluid-structure interaction

Critical speed calculation of rigid rotor supported by AMB

Finite Element Analysis for Gate Rotor Shaft of Single Screw Compressor

Numerical Analysis of Rotor Dynamics of Dredge Pump Shafting

Dynamic characteristics analysis of a dual-rotor system with inter-shaft bearing

Study on Vibration Characteristics of the Shaft System for A Dredging Pump Based on Fem

Analysis of the Dynamic Characteristics of the Ball Bearing-rotor System in High-speed Electric Spindles

Study on the Semi-numerical and Semi-analytical Solutions of the Dynamics Equation of an Aero-engine Rotor System with ERSFD

Finite Element Analysis of the Rotor System of a Magnetically Suspended Compound Molecule Pump

A COUPLED VIBRATION ANALYSIS METHOD OF BLADED DISK MODELBASED ON EQUIVALENT BLADE GROUP OF ANNULAR PLATE WITH VARIABLE PARAMETERS

Nonlinear Dynamic Analysis of a Rotor/bearing/seal System

Dynamic Analysis of an Unsymmetrical Rotor Supported by Oil Film Bearing

Model verification and vibration analysis of the four-disk hollow flexible shaft rotor system

Analytical approach to the stepped multi-span rotor-bearing system with isotropic elastic boundary conditions