Abstract:The rotor unbalance is a major source of rotor vibrations. Rotor vibrations often produce many undesired effects like noise, wear and fatigue, etc. In this paper, we try to seek the benchmark solutions for the unbalance responses of complex rotor-bearing system. The presented approach could be seen as the extension of transfer matrix method (TMM) in some sense. For the TMM, a disk or supporting structure cut off one uniform shaft element into two and someone must use the compatibility condition between these two new elements to derive the transitive matrix. However, for the presented approach, it directly solves the governing equations of uniform shaft elements with consideration of the effects of disks and supporting structures. Thus, this analytical approach is advantageous in reducing the times of matrix multiplication between state matrices and field matrices. One only needs to calculate the inversion of 16 × 16 dynamic stiffness matrix to find the steady state response. It saves the computer memory and is easy to be programmed. In addition, this analytical approach avoids the problems of selecting optimal discretization mesh densities in the case of FEM applications. For arbitrary linear boundary condition, the benchmark solutions are always easy to be obtained. The numerical simulation is carried out and two numerical examples are given to validate the new solutions. In which the finite element method is used as the numerical approach. Simulation results show that the benchmark solutions match very well with the FEM results. The effects of anisotropy in the supporting structures on the rotor's dynamic behavior, which are observed in this work, are also in accordance with many references. This validates the benchmark solutions further.

Dynamic Balance of Unsymmetrical Rotor-Bearing System

Rigid Rotor Dynamic Balancing by Two-Plane Correction with the Influence Coefficient Method

Rigid Rotor Dynamic Balancing with the Influence Coefficient Method

The Design of Dynamic Balancing Machine Based on Finite Element Analysis

Whole-machine Dynamic Balancing Method Without Trial Weights for Multi-span Rotor Shafting Based on Dynamic Finite Element Model

Principle and Application of No Trial Weight Field Balancing for a Rotating Machinery

The Study on Mode Dynamic Balance Method for Rotor System with Bow

A Balancing Method for Multi-Disc Flexible Rotors without Trial Weights

Unbalance Compensation by Recursive Seeking Unbalance Mass Position in Active Magnetic Bearing-Rotor System

Virtual Dynamic Balancing Method Without Trial Weights for Multi-Rotor Series Shafting Based on Finite Element Model Analysis

Study on Dynamic Balance Weighting for Single-Disk Rotor System Based on Phase Difference Mapping

Benchmark solutions for the dynamic analysis of general rotor-bearing system with arbitrary linear boundary conditions

Balancing of flexible rotors without trial weights based on finite element modal analysis

Balancing of Flexible Rotors without Test Weights

Dynamic Balancing of Rotating Machinery in the Field

On-line Unbalance Identification of Flexible Rotor System

A Study of Ill-conditioned Equations Involved in a Dynamic Balancing Process When Influence Coefficient Method is Used

A METHOD TO SELECT WEIGHTS IN ONLINE DYNAMIC BALANCE TECHNOLOGY BASED ON ROTOR-ACTIVE MAGNETIC BEARING SYSTEM

THE OPTIMIZATION TECHNIQUE-BASED BALANCING OF FLEXIBLE ROTORS WITHOUT TEST RUNS

A Study on the Improvement of Balancing Target Selection and Holographic Dynamic Balancing Method

The Study of an On-line Automatic Dynamic Balancing System and Its Dynamic Balancing Method when Used on a Flexible Rotor