Abstract:Semiconducting single-walled carbon nanotubes (s-SWCNTs) are considered as a replacement for silicon in field-effect transistors (FETs), solar cells, logic circuits, and so forth, because of their outstanding electronic, optical, and mechanical properties. Herein, we have studied the reaction of pristine SWCNTs dispersed in a pluronic F-68 (PF-68) polymer solution with para-amino diphenylamine diazonium sulfate (PADDS) to separate nanotubes based on their metallicity. The preferential selectivity of the reactions was monitored by changes in the semiconducting (S22 and S33) and metallic (M11) bands by ultraviolet–visible–near infrared spectroscopy. Metallic selectivity depended on the concentrations of PADDS, reaction time, and the solution pH. Furthermore, separation of pure s-SWCNTs was confirmed by Raman spectroscopy and Fourier-transform infrared spectroscopy. After the removal of metallic SWCNTs, direct current electric field was applied to the pure s-SWCNT solution, which effectively directed the nanotubes to align in one direction as nanotube arrays with a longer length and high density. After that, electrically aligned s-SWCNT solution was cast on a silicon substrate, and the length of the nanotube arrays was measured as ∼2 to ∼14 μm with an areal density of ∼2 to ∼20 tubes/μm of s-SWCNTs. Next, electrically aligned s-SWCNT arrays were deposited on the channel of the FET device by drop-casting. Field-emission scanning electron microscopy and electrical measurements have been carried out to test the performance of the aligned s-SWCNTs/FETs. The fabricated FETs with a channel length of 10 μm showed stable electrical properties with a field-effect mobility of 30.4 cm2/Vs and a log10 (Ion/Ioff) current ratio of 3.96. We envisage that this new chemical-based separation method and electric field-assisted alignment could be useful to obtain a high-purity and aligned s-SWCNT array network for the fabrication of high-performance FETs to use in digital and analog electronics.This article has not yet been cited by other publications.

Fabrication of Carbon Nanotube Field-Effect Transistors by Fluidic Alignment Technique

Improving the Performance of Aligned Carbon Nanotube-Based Transistors by Refreshing the Substrate Surface.

Monolithic Three‐dimensional Integration of Aligned Carbon Nanotube Transistors for High‐performance Integrated Circuits

Fabrication of carbon nanotube field effect transistors by AC dielectrophoresis method

Aligned Single-Walled Carbon Nanotube Patterns with Nanoscale Width, Micron-Scale Length and Controllable Pitch

Selective Chemistry-Based Separation of Semiconducting Single-Walled Carbon Nanotubes and Alignment of the Nanotube Array Network under Electric Field for Field-Effect Transistor Applications

Aligned carbon nanotube field effect transistors by repeated compression-expansion cycles in Langmuir-Blodgett

Solution processed large area field effect transistors from dielectrophoreticly aligned arrays of carbon nanotubes

Direct Growth of Horizontally Aligned Carbon Nanotubes Between Electrodes and Its Application to Field-Effect Transistors

Selective Fabrication of Quasi-Parallel Single-Walled Carbon Nanotubes on Silicon Substrates

Nanotube and Nanowire Transistors

Carbon Nanotube Lateral Field Emission Device with Embedded Field Effect Transistor

Short Channel Carbon Nanotube Thin Film Transistors with High On/off Ratio Fabricated by Two-Step Fringing Field Dielectrophoresis

Aligned 2D carbon nanotube liquid crystals for wafer-scale electronics

Fabrication of Metal-CNT-Metal Structures by Fluidic Alignment

DNA-directed nanofabrication of high-performance carbon nanotube field-effect transistors

Fabrication of Nitrogen-doped Multi-walled Carbon Nanotube and Their Field Effect Transistor Properties

Scalable Fabrication of Ambipolar Transistors and Radio-Frequency Circuits Using Aligned Carbon Nanotube Arrays.

Wafer-scale Monodomain Films of Spontaneously Aligned Single-Walled Carbon Nanotubes

Self-aligned ballistic n-type single-walled carbon nanotube field-effect transistors with adjustable threshold voltage.

Field-Effect Transistors Based on Single-Wall Carbon Nanotubes Bundles