Abstract:As the integration of chips in 3D integrated circuits (ICs) increases and the size of micro-bumps reduces, issues with the reliability of service due to electromigration and thermomigration are becoming more prevalent. In the practical application of solder joints, an increase in the grain size of intermetallic compounds (IMCs) has been observed during the reflow process. This phenomenon results in an increased thickness of the IMC layer, accompanied by a proportional increase in the volume of the IMC layer within the joint. The brittle nature of IMC renders it susceptible to excessive growth in small-sized joints, which has the potential to negatively impact the reliability of the welded joint. It is therefore of the utmost importance to regulate the formation and growth of IMCs. The following paper presents the electrodeposition of a Ni-W layer on a Cu substrate, forming a barrier layer. Subsequently, the barrier properties between the Sn/Cu reactive couples were subjected to a comprehensive and systematic investigation. The study indicates that the Ni-W layer has the capacity to impede the diffusion of Sn atoms into Cu. Furthermore, the Ni-W layer is a viable diffusion barrier at the Sn/Cu interface. The "bright layer" Ni2WSn4 can be observed in all Ni-W coatings during the soldering reflow process, and its growth was almost linear. The structure of the Ni-W layer is such that it reduces the barrier properties that would otherwise be inherent to it. This is due to the "bright layer" Ni2WSn4 that covers the original Ni-W barrier layer. At a temperature of 300 °C for a duration of 600 s, the Ni-W barrier layer loses its blocking function. Once the "bright layer" Ni2WSn4 has completely covered the original Ni-W barrier layer, the diffusion activation energy for Sn diffusion into the Cu substrate side will be significantly reduced, particularly in areas where the distortion energy is concentrated due to electroplating tension. Both the "bright layer" Ni2WSn4 and Sn will grow rapidly, with the formation of Cu-Sn intermetallic compounds (IMCs). At temperatures of 250 °C, the growth of Ni3Sn4-based IMCs is controlled by grain boundaries. Conversely, the growth of the Ni2WSn4 layer (consumption of Ni-W layer) is influenced by a combination of grain boundary diffusion and bulk diffusion. At temperatures of 275 °C and 300 °C, the growth of Ni3Sn4-based IMCs and the Ni2WSn4 layer (consumption of Ni-W layer) are both controlled by grain boundaries. The findings of this study can inform the theoretical design of solder joints with barrier layers as well as the selection of Ni-W diffusion barrier layers for use in different soldering processes. This can, in turn, enhance the reliability of microelectronic devices, offering significant theoretical and practical value.

The Effect of Sputtered W-based Carbide Diffusion Barriers on the Thermal Stability and Void Formation in Copper Thin Films

Tungsten Carbides As a Diffusion Barrier for Cu Metallization

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Interfacial Reaction of W/Cu Examined by an N-Body Potential Through Molecular Dynamics Simulations

Reliability Studies of Barrier Layers for Cu/PAE Low-K Interconnects.

Improvement of Diffusion Barrier Performance of Ru Thin Film by Incorporating a WHfN Underlayer for Cu Metallization

Investigation on the Interfacial Stability of Multilayered Cu–W Films at Elevated Deposition Temperatures During Co-Sputtering

Evaluation of the thermal stability of TiW/Cu heterojunctions using a combined SXPS and HAXPES approach

Effect of sputtered Cu film’s diffusion barrier on the growth and field emission properties of carbon nanotubes by chemical vapor deposition

Effect of heat treatment on TiN diffusion barriers in copper thin film metallization on PI substrates

First-principles investigation of copper diffusion barrier performance in defective 2D layered materials*

Diffusion Barrier Performance of Ni-W Layer at Sn/Cu Interfacial Reaction

Thermal and Oxidation Stability of Ti$_x$W$_{1-x}$ Diffusion Barriers Investigated by Soft and Hard X-ray Photoelectron Spectroscopy

Recent Advances in Barrier Layer of Cu Interconnects

Thermal Stability and Performance of Nbsitatizr High-Entropy Alloy Barrier for Copper Metallization

Improvement of Thermal Conductivity of Electroplated Copper Interconnections by Controlling Their Crystallinity

Barrier layer dependence of self-annealing effect in directly electroplated copper films

The nucleation and growth mechanism of solid-state amorphization and diffusion behavior at the W-Cu interface

Effects of preannealing on the diffusion barrier properties for ultrathin W–Si–N thin film

Barrier layer and annealing temperature dependent microstructure evolution of nanocrystalline Cu films

Eliminating Cu–Cu Bonding Interfaces Using Electroplated Copper and (111)-Oriented Nanotwinned Copper